The Kathrein-Scala Paraflector® is a high-gain half-parabolic antenna used in broadcast and communications systems around the world.
High front-to-back ratio for point-to-point relay system applications, as well as GSM cellular repeaters and MAS and ISM systems.
Fabricated from seamless drawn aluminum tubing and extruded pipe and heavy aluminum castings, gold anodized for corrosion protection, plus stainless steel hardware and fastenings. Foam filled broadband feed assembly requires no pressurization and can be easily replaced if necessary.
Frequency range: 940–960 MHz
Gain: 18 dBi (16 dBd)
Impedance: 50 ohms
VSWR: < 1.2:1
Polarization: Horizontal or vertical
Front-to-back ratio: >25 dB
Maximum input power: 100 watts (at 50°C)
H-plane beamwidth: 12 degrees (half-power)
E-plane beamwidth: 24 degrees (half-power)
Connector: N female
Weight: 38 lb (17.2 kg)
Dimensions: 68 x 36 x 18 inches (1727 x 914 x 457 mm)
Wind load at 93 mph (150kph): Front/Side 134 lbf / 72 lbf; (594 N) / (320 N)
Wind survival rating: 100 mph (160 kph)
Shipping dimensions: 40 x 36 x 7 inches (1016 x 914 x 178 mm)
Shipping weight: 47 lb (21.3 kg)
Mounting Mounting kits: available for masts of 2.375 to 4.5 inches (60 to 114 mm) OD.
2 x MKPX-2 Mounting Kit for 2.375 inch (60 mm) OD mast.
MKPX-9 Mounting Kit for 2.875 inch (73 mm) OD mast.
MKPX-10 Mounting Kit for 3.5 inch (89 mm) OD mast.
MKPX-11 Mounting Kit for 4 inch (102 mm) OD mast.
MKPX-12 Mounting Kit for 4.5 inch (114 mm) OD mast.
MKTB-1 Tilt Mount Kit, 8-39 degrees tilt angle. Used with any MKPX kit listed above
Additional Product Photos