Broadcasters General Store
 Amplifiers  (139)
 Antennas  (4)
 Assistive Listening  (2)
 Audio Processing  (111)
 Batteries  (10)
 Cable/Wire  (80)
 Camera Support  (3)
 Cases  (26)
 Cassette Recorders  (2)
 CD Players  (8)
 CD Recorders  (3)
 Clocks/Timers  (49)
   All Clock Accessories  (1)
   Analog Clocks  (7)
   Digital Clock/Timers  (12)
   Master Clocks  (19)
   Slave Units  (10)
 Codecs  (71)
 Computer Hardware  (16)
 Connectors  (292)
 Consoles  (103)
 Converters  (116)
 Digital Players  (5)
 Digital Recorders  (7)
 Duplicators  (5)
 DVD Recorders
 DVD/Blu-ray Players  (1)
 EAS  (9)
 Extenders  (7)
 Fiber Extender
 Headphones/Headsets  (50)
 Hum Reduction  (8)
 IFB  (42)
 Intercoms  (40)
 Isolation Transformers  (12)
 Lighting  (6)
 Logging  (1)
 Maintenance  (2)
 Metering  (3)
 Microphones  (214)
 Mini Disc  (1)
 Mixers  (62)
 Modulators  (1)
 Multiplexers  (2)
 On-Air Lights  (17)
 PA Systems  (3)
 Paging  (3)
 Patchbays  (1)
 Portable Recorders  (12)
 Power  (25)
 PPM  (5)
 Punchblocks  (2)
 Racks  (83)
 RDS  (6)
 Receiver/Tuner  (5)
 Recording Media
 Remote Control  (133)
 RF Equipment  (182)
 Satellite  (4)
 Serial RS232/422/485  (25)
 Signs  (12)
 Silence Sensor  (3)
 Software  (19)
 Sound Cards  (42)
 Sound Treatment  (8)
 Speakers  (93)
 Streaming  (3)
 Studio Furniture  (14)
 Switchers & Routers  (54)
 Telephone Audio  (67)
 Teleprompters  (4)
 Test Equipment  (17)
 Tower Lighting  (18)
 Turntables  (2)
 Two-Way Radio  (1)
 Video  (29)
 Weather Instruments
 Workstations, Digital
LX-5105 5" Self-Setting Analog Clock Slave $575.00
ESE Warranty  |  ESE List Prices

LX-5105 5" Self-Setting Analog Clock Slave
Click to enlarge

Product Details
The LX-5105 / LX-5112 / LX-5116 are Wall Mount Analog Clocks with a 5", 12" and 16" viewing diameter, respectively. The units are designed to operate as Time Code Readers, Stand-Alone Clocks or Impulse Clocks. They can read, decode and display time information from most any Master Clock or other source of time code. A rear-mounted DIP switch permits the clock to display time as received from a source of SMPTE/EBU, ASCII or ESE Time Codeā„¢ (the Impulse Clock mode may be replaced with an IRIG-B input mode as a factory option). After a very simple "set-up" procedure and receipt of time code, the unit automatically sets itself to the exact time and continuously slaves to the time code (If time code is lost, an error indicator is lit and the clock continues counting while referencing an internal crystal time base).

Other user defined modes of operation allow these clocks to be synchronized to a Master Clock with a 1 PPS alternating 12 or 24 VDC "Favag" type output or to be set to real time and allowed to run based on its internal crystal oscillator. The second hand is completely silent and can be programmed for "Sweep" mode or "Step" mode.

The initial set-up allows the unit to have its hours (and/or minutes) offset to that of another time zone. Also, since the clock can continuously track time code, there is no need to twice annually compensate for daylight saving time (assuming the Master Clock automatically adjusts itself accordingly).

Product Specifications
  • Silent Operation
  • Simple Setup; Self-Setting with Time Code Input
  • Reads ESE, ASCII, SMPTE or EBU Time Code (IRIG-B optional)
  • Stand-Alone, Impulse & Reader Modes
  • Sweep or Step Second Hand
  • 5", 12" or 16" Dial
  • Viewing Distance 20', 60' or 80'
  • Battery Back-up
  • Time Zone Offset
  • Time Code Loss Indicator

  • Optional Accessories


  • IRIG-B Input: The "Impulse" circuitry is replaced with the IRIG-B input. (Not available with option Light on the LX-5105)


  • 220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.


  • Lighted Dial: Available only on the LX-5100 Series Analog Clocks. The dial of the clock can be illuminated. A brightness control is included. (Not available with option IRIG-B on the LX-5105)


  • 19" Front Panel (Rack Mount), this unit will be 8RU.


  • "UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
  • Quantity:  
    (Do not use commas)
    My Account
     My Account
     Quote Request Contents
     Submit Quote Request
    Quote Request
    0 items

    Manufacturer Specials & Rebates
    Click here to check for any available promo deals from our vendors.