The ES-562/564U is a 12 or 24 Hour Clock and a 24 Hour Up/Down Timer combined in one unit. The display and dual-function pushbutton controls are switchable between the Clock and Timer functions. The Clock and Timer are separate from each other and maintain their own memory. Dual-function Set/Stop, Select/Reset controls, along with Clock/Timer mode controls and Timer Up/Down momentary toggle switch are provided on the top of the case.
Black Anodized Front Panel. Available with options 'P','P2' or 'Q'.
Crystal Time Base: A crystal reference is employed for those applications requiring independence from the line frequency. A trimming function is included for greater accuracy (2-3 seconds/week).
Remote Control: This option consists of a connector wired to switches on a control plate via a six-foot cable. Extra cable available.
ESE Time Code Output: An ESE Time Code output is provided allowing the unit to drive ESE Time Code Slaves.
220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
Reverse Count at Zero: Changes count direction from Down to Up at Zero.
19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" clear or black anodized Aluminum and chassis is 5" - 10" deep.
Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel.
Console Mount: The unit is housed in an enclosure 8" deep, front panel is 3.5" x 9", 1/8" clear anodized aluminum.
Remote Input: Rear-mounted connector for Remote Control.
RS-232C Output: Computer Interface allows the time code data to be shared with a computer. RS-422A may be specified.
"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
3-Wire Power Cord: Recommended where static charges can occur. Standard on many units, otherwise a 2-wire cord is supplied.