Overview
BE11 SD SDI to Analog Converter
- Use with Monitors, VTRs and Projectors
- SD SDI Input
- Analog Composite Output
- Component, S-Video Output
- 12 Bit
BrightEye 11 provides digital to analog video conversion with the full range of analog output formats available: Beta, SMPTE, RGB, and composite (with simultaneous Y/C).12 bit processing and conversion at 8 x oversampling mean the best looking images possible.Output format and gain are controlled from the front panel. A status display indicates input presence. Video levels can be adjusted through BrightEye Mac or PC software.BrightEye 11 is the perfect choice to feed monitors, VTRs, or video projectors.
- Serial Digital Input
- Number One
- Type HD Serial Digital 1.485 Gb/s
- SMPTE 274M, 292M or 296M
- or SD Serial Digital 270 Mb/s
- SMPTE 259M
- Impedance 75 U
- Return Loss >15 dB
- Max Cable Length 100 meters for HD
- 300 meters for SD
- (Belden 1694A)
- Automatic Input Cable Equalization
- HD Standards Supported:
- 1080i (SMPTE 274M -4,5,6) 50, 59.94 or 60 Hz720p (SMPTE 296M -1,2,3) 50, 59.94 or 60 Hz1080p (SMPTE 274M -9,10,11) 23.98, 24, 25 Hz1080sF (RP211 -14,15,16) 23.98, 24, 25 Hz
Analog Output - HD input yields HD analog out,
- SD input yields SD analog out
- Number One component or
- one composite and one Y/C
- Type Beta/SMPTE, Y, Pr, Pb
- RGB
- NTSC, PAL Composite
- NTSC, PAL S-Video
- Return Loss >40 dB
- Output DC None (AC coupled)
Serial Digital Output - Number One
- Type Follows input
- Impedance 75 U
- Return Loss >15 dB
- Max Cable Length 100 meters for HD
- 300 meters for SD
- (Belden 1694A)
SDI to Analog Performance - Bit Resolution 12 bit output reconstruction
- 8 x oversampling
- Signal to Noise >65 dB
- Frequency Response ±0.1 dB, 0 to 5.5 MHz
- K Factor <1%
- ScH Phase Error <±2 degrees
- Differential Phase <1 degree
- Differential Gain <1%
General Specifications - Size 5.63" W x 0.8" H x 5.98" D
- (143 mm x 21 mm x 152 mm)
- including connectors and flange
- Weight 1 lb 12 oz
- Power 12 volts, 7 watts
- (100-230 VAC modular power supply)
- Temperature Range 0 to 40° C ambient (all specs met)
- Relative Humidity 0 to 95%, non-condensing
- Altitude 0 to 10,000 ft.
