Gefen EXT-UHD-CAT5-ELRPOL 4K Ultra HDMI Extender Over CAT5E

$0.00
Write a Review
SKU:
GEF- EXTUHDCAT5ELRPOL
Availability:
Discontinued, No Longer Available

Overview

DISCONTINUED

Gefen EXT-UHD-CAT5-ELRPOL 4K Ultra HDMI Extender Over CAT5E

The Gefen 4K Ultra HD ELR-POL Extender uses Gefen's implementation of the HDBaseT technology to extend HDMI up to 495 feet (150 meters) using one CAT-5e cable. Resolutions up to 4K Ultra HD with 7.1 channels of HBR (High Bit Rate) lossless digital audio are supported. This product provides Ethernet, RS-232 and 2-way IR extension between the Sender and the Receiver units, making 10/100BaseT wired Ethernet connection available at the remote location without the need to run a separate cable. It also allows the transfer of IR commands and RS-232 communications between two remote locations. RS-232 and Bi-Directional IR can be used to control A/V sources placed near the Sender unit and to send automation commands to the display or another device placed near the Receiver unit. Gefen's Bi-Directional POL (Power Over Line) technology powers the Sender or the Receiver unit using the same cable that extends the HDMI signal. Only one of the two units needs a power supply

  • Extends 4K Ultra HD (3840 x 2160 @ 30 Hz), Ethernet, RS-232, and Bi-Directional IR over a single CAT-5e cable up to 330 feet/100 meters (8-bit color)
  • Extends HDMI at 1080p Full HD, Ethernet, RS-232, and Bi-Directional IR over a single CAT-5e cable up to 330 feet/100 meters (up to 12-bit Deep Color)
  • Extends HDMI at 1080p Full HD, Ethernet, RS-232, and Bi-Directional IR over a single CAT-5e cable up to 495 feet/150 meters (8-bit color)
  • HDMI Features Supported:
  • HDCP
  • 12-bit Deep Color
  • LPCM 7.1 audio, Dolby TrueHD, and DTS-HD Master Audio pass-through
  • 3DTV pass-through
  • CEC pass-through
  • Lip Sync pass-through
  • RS-232 Extension
  • IR extension from Sender to Receiver and from Receiver to Sender
  • Gefen Bi-Directional POL feature provides power to the Sender or the Receiver unit over the link cable - only one side needs external power
  • Uses Gefen's implementation of HDBaseT technology
  • Advanced EDID Management
  • Firmware upgradable via RS-232
  • Locking power connector
  • Surface mountable

 

Specifications

  • Maximum Pixel Clock: 300 MHz
  • Video Input Connector (Sender): (1) HDMI Type A 19-pin, female, locking
  • Video Output Connector (Receiver): (1) HDMI Type A 19-pin, female, locking
  • Link Connector (Sender/Receiver): (1) RJ-45, shielded
  • RS-232 port (Sender): (1) 3-pin Phoenix - DB-9 adaptor cable included
  • RS-232 port (Receiver): (1) 3-pin Phoenix - DB-9 adaptor cable included
  • IR Ext/In port (Sender/Receiver): (1) 3.5mm mini-stereo jack
  • IR Extender type: EXT-RMT-EXTIRN
  • IR Out port (Sender/Receiver): (1) 3.5mm mini-mono jack
  • Power/Link LED (Sender/Receiver): (1) Bi-color: Blue/Green
  • Power Supply: (1) 24V DC, locking
  • Power Consumption (Sender and Receiver combined): 12W maximum
  • Operating Temperature: +32 to +113 °F (0 to +45 °C)
  • Operating Humidity: 5% to 90% RH, non-condensing
  • Storage Temperature: -4 to +185 °F (-20 to +85 °C)
  • Storage Humidity: 0% to 95% RH, non-condensing
  • MTBF: 50000 hours
  • Dimensions (W x H x D, Sender / Receiver): 4.3" x 1" x 3.2" (110mm x 26mm x 85mm)
  • Net Weight (Sender/Receiver): 0.4 lbs (0.2 kg) each
  • Shipping Weight: 3.0 lbs. (1.4 kg)