Overview

The -TPA1A modules are two pair audio amplifier modules compatible with RDL Format A twisted pair products. Each -TPA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack. The left and right audio signals received on pairs B and C of the twisted pair cable are summed to mono and amplified. The amplified output level is set by an internal VCA which is controlled by a front-panel volume control. The VCA attenuator provides years of scratch-free gain adjustment.

The -TPA1A circuits are all designed for low power consumption. Amplification is provided by a high-efficiency Class D power stage with audio filtering tailored for crisp, pleasant audio clarity. The high-efficiency Class D output stage produces negligible heat for all levels of expected voice or music modulation. When the user reduces the audio level to minimum, the class D output stage is switched off. This sleep mode remains active until the user turns up the output level.

The output drives either a 4 Ohm or 8 Ohm speaker. The speaker cable connects to the module using a detachable terminal block.

The front panel does not include any illuminated indicators, making the -TPA1A ideally suited to installation in dark rooms or areas. Installation is simple and quick, requiring only the connection of the speaker leads and the twisted pair RJ45.

The -TPA1A may be fed and powered from any RDL Format-A sender, and is ideal in hospitality installations fed from a sender connected to a TV monitor (for example: FP-TPS4A Audio Sender from TV with fixed audio output level).

Use the -TPA1A wherever a single speaker user-adjustable wall mounted amplifier is needed. Combine the amplifier with other RDL Format-A products for a cost-effective, high-performance audio system.

Features:

3.5 Watt RMS Audio Amplifier into 8 Ohms
6.5 Watt RMS Audio Amplifier into 4 Ohms
Output Drives 4 or 8 Ohm Speaker
Setting Level to Minimum Activates Energy-Saving Sleep Mode
High-Efficiency Class D Operation
VCA Level Adjustment for Scratch-Free Long Life
Input and Power Connection on RJ45
Connects to Format-A Sender using Twisted-Pair Cable
Powered from RDL Twisted Pair Format-A Sender
Speaker Output Connection on Detachable Terminal Block
Ultra-Compact All Metal Construction
Thermal and Short-Circuit Protection

Specifications

Input:

RDL Format-A

Input Connector:

RJ45

Gain Adjustment:

Single turn audio taper, VCA attenuator

Frequency Response:

50 Hz to 20 kHz (± 1.5 dB)

THD+N:

< 0.1% (@ 1 kHz, 1 W)

Noise:

<-70 dB (below 1 W RMS)

CMRR:

> 50 dB (50 Hz to 120 Hz)

Output Power:

3.5 W RMS (max., into 8 Ohms); 6.5 W RMS (max., into 4 Ohms)

Sleep Mode Power Consumption:

< 0.3 W

Sleep Mode Enable:

Active at audio gain <-60 dB

Ambient Operating Environment:

0° C to 40° C

Power Consumption:

45 mA (idle), 95 mA (1 W into 8 Ohms), 150 mA (1 W into 4 Ohms), 215 mA (3.5 W into 8 Ohms)

Dimensions:

Height: 4.13 in. 10.49 cm; Width: 1.7 in. 4.32 cm; Depth: 2.15 in. 5.47 cm

Package Type:

Cardboard Box

Package Dimensions:

3.625 x 4.625 x 2.125 in.

Shipping Weight:

0.395 lbs.

WEEE Weight:

0.245 lbs

Tariff Code:

8543.70.9910

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.