Overview
Adder CATx DisplayPort Computer Access Modules are highly compact devices that allow you to extend your DisplayPort equipped computer over CATX cable up to 1000 feet / 300 meters. The CATX-DP-USBA CAM connects to the DisplayPort video connector plus USB and Audio ports on your computer and then connects via CAT cabling to the AdderView CATx KVM switches or Adder extender receivers (either AdderLink X2 Silver or X200). Your video display, keyboard, mice and speakers are then all linked to the remote device. The module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer. The CAM supports low speed (1Mb/s) HID USB devices only. This unit also offers 2 channel CD Quality audio that is supported via a 3.5mm jack plug.
| Height |
1 in. (25 mm.)
|
| Width |
1.75 in. (45 mm.)
|
| Depth |
3 in. (75 mm.)
|
| Weight |
0.2 lb. (100 g.)
|
| Environmental |
|
| Operating Temperature |
0°C to 40°C / 32°F to 104°F
|
| Power |
|
| Operating Voltage |
USB powered device Max 500mA @ 5V |
| O/S Compatibility |
Operating system independent |
| Standards |
|
| Approved Agency |
CE, FCC
|
| ECCN (Export Classification Control Number) |
EAR99
|
| HTS (Harmonized Tariff Schedule) |
8471.80.10 ('Control or adapter units')
|
| Connections |
|
| Port |
1 x Display Port; |
|
Resolution |
|
|
Max Resolution & Extension |
1920 x 1200 x 60Hz at 200m (650ft)
1280 x 1024 x 60Hz at 300m (1000ft) |
