Overview
Barix Annuncicom 100 IP Intercom and PA
The Annuncicom 100 is a versatile Audio over IP device designed to serve as a gateway between IP Paging, VoIP and Intercom systems and traditional microphone/speakers or amplifiers.
Supporting both music (MP3) as well as voice codecs (G.711, G.722*) and a large number of protocols (including Shoutcast, SIP etc), the device can be used for both background music as well as VoIP applications.
Applications
- VHF Radio Controller and interface to IP
- Microphone Encoder for IP Audio Surveillance
- Door Intercom Controller, VoIP based
- Help Point/SOS call box device
- Door Intercom Controller, VoIP based
- Classroom VoIP device with built-in amplifier, talkback, serial port
- Paging and Audio Distribution with Amplifier control and monitoring
- Live IP Audio Encoder for Streaming
- Applications
- Generic, bidirectional full-duplex VoIP
- Module for Paging and Intercom Applications
- SIP and IP Paging Zone device
- Digital Annunciator, Message Player/Repeater
Features
- MP3, G.711, G.722*, PCM Encoding and Decoding
- Shoutcast/Icecast Source capability
- Audio Level Supervision with SNMP Trap generation
- IP Streaming via TCP, UDP, RTP, Multicast
- Microphone Input
- Line Level Input / Output
- Amplified Output 2W (8Ohm)
- Relay Output (1)
- Contact Closure Input (2)
- RS-232 Serial Port (1)
- RS-485 Serial Port (1)
- Supply Voltage (9-30VDC or 12 -24VAC)
Specifications / Documents
Electrical
- 9 to 30 VDC, 12 to 24 VAC, 8 Watt max. on screw terminal block and 2.1mm barrel connector
Ethernet
- 10/100Mbps auto
- RJ-45 connector with integrated Link/Activity LED
- Protocols: TCP/IP, UDP, RTP, SIP, DHCP, Multicast capable
RS-232 and RS-485 Interfaces
- On 9-pin Sub-D connector
- 300..230'400 Baud asynchronous, tunneling or local control
MTBF calculation 560 000h (according to MIL217F at 25°C)
Microphone Input
- On detachable screw terminal block and 3.5 mm (1/8") Jack
- 3 pin TRS, with bias power 2.7VDC
Analog Line Input (mono)
- Line level input, 2k Ohm input impedance on RCA 2.2 VPP max, adjustable in sensitivity
- Frequency response 20 Hz .. 20 kHz (-3dB)*
- Dynamic range 87 dB, SNR -87 dB, THD <0.01% (-3dBFS)*
Audio formats
- MP3, encoding/decoding up to 192/320 kbps
- PCM 16 bit and 8 bit (uLaw, aLaw) @ 8..48 kHz
- MP3, VBR, CBR* / VBR, CBR* encoding/decoding
- PCM, G.711, G.722* encoding/decoding
Analog Line Output (mono)
- Line level output, 40..60 Ohm output impedance on RCA
- Output level software controllable
- Full scale output voltage: 3 dBu, 3 VPP
- Frequency response 20 Hz .. 20 kHz (-3dB)*
- Dynamic range 94 dB, SNR -94 dB, THD <0.03 % (-3dBFS)*
Speaker out
- On detachable screw terminal block
- Suggested speaker impedance 4 to 32 Ohm
- 1 Watt max @ 8 Ohm (2 W max @ 4 Ohm)
- Frequency response 20 Hz .. 20 kHz (-3dB)*,
- Dynamic range 80dB, SNR -80dB, THD <0.15% (-3dBFS)*
Model comparison
- Model 60 (48 VDC) , PoE, 5 Watt
- Model 100 (9..30 VDC 12..24 VAC) USB 2 Watt
- Model 155 (24..48 VDC) 5.5 Watt
- Model 200 (16..30 VDC, 48 VDC, 16..24 VAC) PoE, USB, Aipohne 8 Watt
- Model 1000 (24..48 VDC)
Discrete I/O
- On detachable screw terminal block1 relay output with normally closed and open contacts
- 30V 0.5A (AC & DC)
- 2 discrete / dry contact inputs
- * Hardware revision 2 only
Mechanical
- Aluminum case, 390 g
- Dimensions 108 x 38 x 125 mm (4.25 x 1.5 x 4.92 inch)
- rack and wall mountable using accessories
- * depends on used codec, best results @48kHz PCM
The warranty period for defects due to material flaws, design errors or demonstrably careless work within the framework of software development lasts for two years with regard to hardware and one year with regard to software. The warranty period begins when the delivery is dispatched by Barix (for hardware or standard software) or upon acceptance of the software by the contractual partner (for individually developed software).
If the contractual partner has purchased the product for the purpose of resale, carefully stored it and not used it, the warranty period is extended by the amount of time during which the product is stored at the contractual partner's site, but by no longer than one year. The contractual partner undertakes to notify Barix in writing (along with a detailed description) immediately, and no later than within 20 days, of any hidden defects identified during the warranty period. The warranty is excluded in the case of defects which would have been identifiable during a proper inspection of the products, as specified in point 7 of these General Terms.
The warranty is also excluded for defects which Barix is not responsible for, e.g. natural wear and tear, force majeure, treatment and usage by the contractual partner or third parties which is inappropriate and contrary to regulations and purpose, interventions by the contractual partner or third parties, excessive loads, unsuitable equipment, faulty maintenance or extreme environmental influences, as well as in the case of modifications made by the contractual partner to the products before reselling them to third parties.
Barix does not guarantee that the products which it delivers, processes or develops can be used uninterruptedly and absolutely flawlessly.
Barix undertakes to repair or replace, at its own discretion and as quickly as possible, products which are demonstrably defective during the warranty period due to the use of bad-quality materials, faulty design or poor workmanship, or which do not have the contractually guaranteed features or functions. The contractual partner must provide Barix with all the relevant information for this. Replaced parts are the property of Barix. If it transpires that Barix is not responsible for a particular defect, the product will be repaired by Barix against payment.
In the event of demonstrably defective performance on the part of Barix within the framework of an individual software development, the right of rectification is explicitly reserved.
In each case, Barix is liable only for direct or indirect damage which has occurred at the contractual partner's site. Liability for indirect or consequential damage, such as lost profits, third-party claims or damage caused by the contractual partner's failure to comply with contractual obligations is thus explicitly excluded.
The contractual partner does not have any further rights arising out of product defects other than those explicitly mentioned above.
