Overview
BDI SWP-200-1T RF Coaxial Single Switch Controller
The SWP-200 is a stand alone 1RU RF switch controller which can control most brands of motorized RF switches. In addition the SWP-200 manages transmitter interlocks and simplifies the connection of interlock paths.
When installed as a system together with a BDI DPS-100D power meter, The SWP-200 provides complete Hot Switch protection by preventing the movement of a switch if RF is present. The SWP-200 also doubles as a rack mounted RF power display for up to 2 - DPS-100D Sensors. Acts as an SNMPv2 agent for quick interface to SNMP based remote control systems and software.
- A modern approach to RF switch control in a compact 1 RU chassis form factor
- Easily integrates with up to 2 - BDI DPS-100D RF power meters using Ethernet cablefor a complete intelligent RF switch controller with proprietary 3 strike counter
- Automatic transmitter changeover sensing loss of RF power
- Compatible with all major manufacturers RF transfer switches
- RF power display for up to 2 DPS-100D RF power meters
- Built in LAN Port Provides Remote Control Via Free BDI GUI Software SNMPv2 Agent
- Optional RF Switch Cables available for most manufacturers RF switches
Specifications
- Modes Supported: TX1/TX2 select to Air—SWP‐200‐1T, ANT1/ANT2 select, TX1/TX2 select to Air—SWP‐200‐2T,
- Switch Control Voltage: 12 or 24 VDC
- Switch Manufactures supported: Dasto, Delta, Dielectric, DowKey, ERI, MCI, Myat, Spinner
- Transmiter and Interlock Control: Both models control up to two transmiƩers providing TX ON/OFF and Interlock Management
- Transmiter Interface: Form C dry contact relays
- Status Available: Motorized Switch positon, Fault Status, TX1,2 Interlock, Air TransmiƩer ON/OFF
- AC Power Loss Monitor: Monitors for presence of AC Power loss to transmiƩer(s) to prevent switch operaƟon in auto mode if AC power is lost to transmiƩers—Logic input requires external circuitry
- Power Measurement Range: 10 Watt to 100 KW Full Scale Indicaton*
- Power Measurement Accuracy: +/‐5% of Reading—Dynamic Range 40 below Full Scale Indicaton*
- Communicatons Interface: RS232/485, TCP/IP— Ethernet TCP/IP, SNMPv2 Agent and BDI Graphical User Interface CompaƟble with Windows XP, 7 , 8 ,10, Android
- Physical Dimensions: 19” W X 10”D X 1.75” H—EIA Standard 1 Rack Unit
- Electrical Requirements: 100‐240 VAC 50/60 Hertz @ 0.5 ampere
- Environmental: 0‐60 degrees C, non condensing atmosphere