Overview
BE2 Analog to SDI Converter
- Use with VTRs and Cameras
- Composite and S-Video Input
- Component Input
- SD SDI Output
- 12 Bit
BrightEye 2 provides uncompromised analog to digital video conversion of component and composite video. Analog inputs are digitized at 12 bits of resolution with 4x oversampling. Composite video is processed through an adaptive comb filter decoder. PAL / NTSC input detection is automatic.Input selection and gain adjustment is made from the front panel. A status display provides an input presence indication. Video levels can be adjusted through BrightEye Mac or PC software.Supporting both Beta and SMPTE component, composite, and Y/C formats, BrightEye 2 adapts to many conversion needs.Use BrightEye 2 to digitize analog VTRs and cameras.
Specifications:
- Analog Input
- Number One
- Type Beta/SMPTE, Y, Pr, Pb
- NTSC, PAL Composite
- NTSC, PAL S-Video
- Impedance 75 U
- Return Loss >40 dB
- Input DC +/-1 volt DC
- Input Hum <100 mV
Serial Digital Output - Number One
- Type 270 Mb/s SD Serial Digital
- (SMPTE 259M)
- Delay < 90 Sec
- Impedance 75 U
- Return Loss >15 dB
- Output DC None (AC coupled)
Analog to SDI Performance - Bit Resolution 12 bit input quantization
- 4 x oversampling
- Signal to Noise >62 dB, weighted
- Frequency Response
- Composite and Y ±0.1 dB, 0 to 5.5 MHz
- Pr, Pb ±0.1 dB, 0 to 2.75 MHz
- Delay 90 Sec
General Specifications - Size 5.63" W x 0.8" H x 5.98" D
- (143 mm x 21 mm x 152 mm)
- including connectors and flange
- Weight 14 oz
- Power 12 volts, 5 watts
- (100-230 VAC modular power supply)
- Temperature Range 0 to 40° C ambient (all specs met)
- Relative Humidity 0 to 95%, non-condensing
- Altitude 0 to 10,000 ft.
