Overview
Broadcast Devices ISC-200, Dual Independent Motorized RF Switch Controller with SNMP
The ISC-200 Dual Independent motorized switch controller designed to control RF switches and provide transmitter control and status for up to four transmitters. A sleek single rack unit design with front panel pushbutton control and display for status in addition to rear panel GPIO control and Ethernet SNMP control and status. The ISC-200 is offered with optional RF switch interface and transmitter interface cables making an installation simple and fast.
Features
- A modern approach to RF switch control in a compact 1 RU chassis
- Management/Control/Status of up to Two (2) RF switches and interlocks independently
- Built-in LAN Port provides remote control via the supplied BDI GUI Windows App and as an SNMPv2 Agent
- Four (4) Inputs available for RF Safe Switch Operations when used with BDI DPS-100D series power meters RF Presence Relay
- Compatible with all major manufacturers’ RF transfer switches
- Local Control/Status Connectors Provided for Interface to Legacy Remote Controls or Local Control/Status Panel
- Optional RF Switch Cables available for most manufacturers’ RF switches
- Optional Transmitter Control/Interface Cables available for most transmitters
Specifications / Documents
- Switch Control Voltage: 12 or 24 VDC-Selectable for Each Switch
- Switch Manufacturers supported:
- Delta (Requires use of Delta Low Voltage Interface-Contact Delta Electronics for more information)
- Delta Meccanica
- Dielectric 50/60K
- DowKey
- ERI
- Kintronics
- Mega/MCI
- Myat
- Spinner
- Transmitter and Interlock Control: Each Switch movement supports up to two transmitters providing TX ON/OFF and Interlock Management
- Transmitter Interface: Form C dry contact relays
- GPIO Remote Control interface: TX On/Off, TX EXT., Interlock Input, TX On/Off Status, Switch Position
- Remote Control Input: Momentary contact to ground or SNMP v2
- Remote Status Output: Open collector output – Active Low pulled up to 5 VDC
- Drive Output to Switch: Dry relay form C contact closure Contact Rating 24 VDC @ 3A.
- Communications Interface:
- RS485
- Ethernet TCP/IP
- SNMPv2 Agent (MIB file supplied)
- Supplied
- BDI Graphical User Interface Windows App
- LAN connection RJ45 TCP/IP – SNMP v2 Agent
- Electrical Requirements: 100-240 VAC 50/60 Hz @ 0.5 ampere
- Environmental: 0-60 degrees C, non-condensing atmosphere
- Power Requirements: 100 to 240 VAC 50/60 Hertz @ 0.5 ampere
- Mechanical Dimensions: 19 in W x 10 in D x 1.75 in H (483 mm W x 254 mm D x 44 mm H) Standard
One (1) EIA Rack Unit Enclosure with Four (4) Mounting Holes - Shipping Weight: 15 lbs (7 kg)
