Overview
Control any SNMP device on your LAN or WAN
Save time and reduce wiring cost.
Now it’s easier than ever to connect to remote site equipment using SNMP Plus, the new optional SNMP manager inside the ARC Plus Touch or ARC Plus SL*. Integrate any SNMP-enabled device on your LAN or WAN with no additional wiring.
Monitor, display and log SNMP data in real time.
Map SNMP data directly to ARC Plus status and meter channels. Set alarm thresholds for fault detection. Respond automatically to changes in SNMP parameters using JetTM Active Flowcharts.
Manage alarms efficiently.
SNMP Traps, changes on SNMP status channels or threshold crossings on SNMP meter channels can be configured to generate email or SMS text alarm messages, or to make dial-out telephone calls using the Recordable Speech Interface, just like any other ARC Plus channel.
Take control with SNMP.
All the command and control capabilities of the ARC Plus Touch and ARC Plus SL can now be directed to your SNMP-enabled site equipment. Configure ARC Plus control channels to send SNMP “set” commands. Send commands to SNMP equipment on-the-fly using the ARC Plus smartphone interface. Combine SNMP with traditional parallel I/O in comprehensive automated functions.
Mix it up with SNMP Plus and Plus-X I/O.
SNMP-enabled devices at the transmitter site sit side-by-side with units that require parallel wiring for meters, status and control connections. Plus-X units let you distribute this I/O wherever it is needed in the broadcast facility or at other remote sites. ARC Plus connects to Plus-X units over the same LAN or WAN that it uses for SNMP communication, simplifying wiring and providing total facility control.
* Requires Version 5 ARC Plus Touch or ARC Plus SL.
Specifications
ARC Plus compatibility:
Requires ARC Plus Touch Version 5
or ARC Plus SL Version 5
SNMP Version:
Compatible with SNMP v1 and v2c
Managed devices:
Up to 50 managed devices
Included MIB files:
SNMPv1-MIB.mib
SNMPv1-SMI.mib
RFC1155-SMI.mib
Manufacturers’ MIB files:
Imported by user. Number and type of MIB files not restricted.
Meter channel OIDs:
Up to 256 Meter channel OIDs
Meter channel OID data types:
Integer with optional scale factor
IEEE floating point
Status channel OIDs:
Up to 256 Status channel OIDs
Status channel OID data types:
Integer with programmable match value
String with programmable match text
Command channel OIDs:
Up to 256 Raise command OIDs
Up to 256 Lower command OIDs
Command OID data types:
Programmable integer value
Programmable counter value
Programmable text string
Programmable IP Address
Meter channel value
Status channel value
