BW Broadcast TX600 V3, 600 Watt FM Transmitter with Analog/AES, RDS and Processing

This 600W, 2U FM transmitter is the perfect piece of equipment for you. Built in 4-band DSP audio processing, Ethernet control, RDS Encoder and FSK IDer, GPS inputs for SFN applications, Hot swap PSU and a whole lot more.

Now with a DDS exciter, the TX600 V3 takes the legendary and clean exciters of earlier models with it's ultra-low distortion modulator to a new level. The TX600 V3 has an integrated multi-band DSPX audio processor that means stations without a dedicated processor sound great, right out of the box. This market leading DSP based multi-channel audio processor has been designed to give you a major market signature sound on a budget. With both four band program dependent limiting and wide band AGC with intelligent gating, parametric EQ and shelf bass enhancement, multi band distortion controlled clipper and a powerful composite clipper with pilot protection. All this allows you to tailor your sound for maximum impact.

• 10- 610 watts RF output power
• Direct to channel digital modulation
• GPS inputs for SFN application
• XLR analogue & digital inputs
• Dual MPX / SCA in and outs
• Lab grade DSP stereo generator
• RDS generator
• DSPX multi-band processor inside
• VSWR and temp monitoring
• Slide-in & Hot swap power supplies
• Events, alarms and actions
• Remote control as a standard.
• RS232, Telnet, SNMP
• Mobile ready web browser control

RF

• Harmonics: better than -75 dBc
• Spurious: <-90dBc
• Frequency range: 87.5 – 108 MHz
• Frequency steps: 10KHz to 100KHz selectable
• Frequency selection: User interface or web remote control
• Frequency control type: direct to channel DDS
• Frequency stability: <+/- 100 Hz
• Modulation: DDS
• Synchronous AM Noise: >60dB% min (at normal deviation)
• Asynchronous AM Noise: >70dB
• RF Connector: N-type 50 Ohm

AUDIO & MPX I/O

• MPX input / output connector: 2 X BNC IN / 2 X BNC OUT
• MPX input / output impedance: 10K
• MPX input level: -10dB to +10dB (adjustable)
• MPX input / output response: +/- 0.01 dB, 5 Hz to 100 kHz
• Audio input connectors: XLR balanced
• Analog input impedance: 10 kOhm
• AES/EBU sampling rates: 32KHz-192KHz (MPX OVER AES READY)

STEREO

• Subcarrier generation: DSP
• Pilot: 19 kHz +/- 1 Hz (adjustable)
• Pilot generation:
  • Output level: 0dBu – 12dBu adjustable
  • 15 kHz filtering: 80dB at 19kHz (DSP based)
  • Overshoot filter clipping: DSP based
  • Spurious: >80 kHz / >160kHz: > -60dBr / > -80dBr
  • Stereo separation: 80dB at 19kHz (DSP based)

OTHER

• RF Power; 10W – 610W
• User Interface: 3 buttons, rotary encoder & 256×64 graphics display
• External control: I/O Alarms D9-type Male; RS232 D9-Type Female
• Voltage input: 100-265 VAC
• Environmental: 795W average @ 300W RF
• Switched mode approvals: UL / TUV / CE
• Size (mm): 500mm x 490mm x 90mm 2RU
• Weight: 8.7 kg