Overview
Clear-Com PS-702, 2 CH Rack Mount Power Supply
The PS-702 can supply up to 2 amps at 30 volts DC to two channels in a 1RU. This is sufficient to power up to 40 beltpacks,10 speaker stations, or 12 headset stations even under the most demanding conditions. Either channel is capable of supplying up to 1.2 amps. The full current capacity may be divided between the two channels.
- Provides up to 2 amps at 30 Volts
- Supports up to 40 beltpacks, 10 speaker stations, or 12 headset stations
- Full current capacity can be divided between the two channels
- Exclusive Intelligent Fault/Overload Sensing (IFOS) for system reset
- A+B Link switch for single-channel operation
- Built-in test tone generator for set up and diagnostics
- UL listed and CE certified
- Line and load regulated
- Short-circuit protected
Specifications / Documents
PROGRAM LINE INPUT
- Maximum Level before Clipping: >= 20dBu
- Input Impedance: >= 5K
FREQUENCY RESPONSE
- Program Input – Partyline: 200 – 20kHz ± 3dB
MAX DISTORTION
- Program Input – Partyline: <= 0.2%
NOISE
- Program Mic Input – Partyline: < -70dBu
MAX GAIN
- Program Input – Partyline: >= -16dB
MIN GAIN
- Program Input – Partyline: <= -20dB
MAINS POWER
- Input Voltage Range: 100 – 240V AC
- Input Frequency Range: 50 – 60Hz
- Input Power: <= 60V AC
- Output Voltage: 30V DC ± 0.5V
- Output Current per Channel (Continuous): 1.2A
- Output Current per Channel (Peak): 2A (Do not exceed the 1.2A rating for more than 2 seconds per 1 minute period)
- Short Circuit Recovery Time (1st short):<= 0.5 sec
- Short Circuit Recovery Time: >= 20 shorts in 20sec) <= 20 sec
DIMENSIONS
- 1.75 x 19 x 7.5in (HxWxD), (44 x 483 x 190mm)
WEIGHT
- 6.16lbs (2.80kg)
