Overview
DEVA GPS-ANT. GPS Antenna, 3m cable with SMA connector
This GPS Active Antenna is designed to receive and amplify the radio signals transmitted on specific frequencies by GPS satellites and convert them to an electronic signal for use by a GPS receiver. It is suitable for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The GPS Ant comes in waterproof housing, 3m coaxial cable with SMA connector and strong magnet base with a rubber boot on the magnet for scratch resistance. This GPS antenna is the perfect addition for all DEVA Broadcast devices with built-in GPS receivers.
Electrical Data | |
Frequency (GPS Only) | 1575.42±3MHz |
Frequency (GPS/GLONASS) | 2696±3MHz |
VSWR | 1.5 max |
Bandwidth | 20MHz min @-10dB |
Axial Ratio | 3dB max |
Polarization | RHCP |
Peak Gain | 4dBic min @0° |
Gain Coverage | ≥ -4dBic @-90° ≤ θ ≤ 90° (over 75% volume) |
Impedance | 50Ω |
LNA/Filter Module | |
Frequency Range | 1555 to 1615MHz |
Module Gain | 29dB typ. |
Moise Figure | 0.9dB max |
Output VSWR | 2.0 max |
Output Impedance | 50Ω |
Operation Voltage | DC 2.7 to 5.5V |
Current | 6 to 11mA |
Mechanical Data | |
Weight (without Cable) | 42g |
Size | 48 x 40 x 13mm |
Mounting | Magnetic base |
RF Cable | 3m with SMA connector |
Operating Conditions | |
Working Temperature | -40°C to +85°C |
Storage Temperature | -50°C to +95°C |
Vibration | Sine Sweep, 1G(0-P), 1-150-10Hz each axis |
Humidity | 95 to 100% RH |
Weatherproof | IP56 |