Overview
The D SERIES-SP1A is a compact 8 ohm loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. The driver is constructed of materials found in premium larger speakers. The unique steel enclosure provides full baffling in a tightly sealed rigid structure. This produces sonic presence within an extended frequency range expected from larger speakers. Internal filtering rolls off out-of-band frequencies to reduce distortion and increase peak power capability. Dispersion covers a spherical area of nearly 180 degrees with the speaker mounted in a wall.
The input is connected through a 2-position detachable terminal block on the rear panel. The D SERIES-SP1A operates with a continuous audio input up to 2 watts, making it suited to be driven by speech or music content from amplifiers with a maximum rated power of up to 10 W. Models are available with grills in black (DB-SP1A), white (D-SP1A), gray (DG-SP1A) or stainless steel (DS-SP1A).
Features:
- Acoustically Optimized Decora Enclosure
- Fidelity Comparable to Larger Drivers
- Exceptional Audio Quality for Ultra-Compact Size
- Rich Presence and Detailed Clarity
- Hemispherical Dispersion Mounted In Wall or Flat Surface
- Convex Aluminum Cone with Rubber Surround
- Neodymium Motor
Specifications
Input Power:
2 W RMS (modulation peaks limited to 10 W
Input Connection:
Detachable terminal block (14 to 24 AWG)
Impedance:
8 Ohms (nominal)
Frequency Range:
150 Hz to 20 kHz, nominal
Sensitivity:
78 dB (1 W, 1m nominal)
Enclosure:
Powdercoated steel
Grill:
Formed perforated steel
Dimensions:
Height: 4.1 in. 10.4 cm; Depth: 2.07 in. 5.26 cm (with terminal block); Width: 1.72 in. 4.37 cm
Mounting:
Mounts in US electrical box, RDL international wall boxes WB-, surface mount box SMB-, or desktop chassis’ DC- available separately.
Mounting Box Minimum Depth:
2 in. 5.08 cm
Package Type:
Cardboard Box
Package Dimensions:
3.625 x 4.625 x 2.125 in
Shipping Weight:
0.535 lbs. (D-SP1A, DB-SP1A); 0.525 lbs. (DS-SP1A)
WEEE weight:
0.390 lbs. (D-SP1A, DB-SP1A); 0.380 lbs. (DS-SP1A)
Tariff code:
8518.21.0000
RDL Three-Year Limited Warranty
Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and
conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the
Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products
manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date
of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or
products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge,
and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the
usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser.
RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or
modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or
proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental
cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any
liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either
separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or
not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support
appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end
user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements
reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized
to assume for RDL any other liability in connection with RDL products.