ESE ES-302UE .55" 100 Minute-Second Up/Down Timer Desktop

ESE ES-302UE .55" 100 Minute-Second Up/Down Timer Desktop

MSRP: $420.00
Write a Review
SKU:
ESE-ES302UE
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability
Type:
Digital Clock / Timer
Adding to cart… The item has been added

Overview

ESE ES-302UE .55" 100 Minute-Second Up/Down Timer Desktop

The ES-302U is a 100 Minute Up/Down Timer. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. If the relay contact closure option is ordered, the contacts are accessible on a rear-mounted DB-9 connector.

  • .56" Yellow LED Display
  • 100 Minute-Second Up/Down count range (00:00 - 99:59)
  • Thumbwheel Preset
  • Optional relay-contact closure output at zero
  • Optional Stop at zero
  • Optional Tenths of Seconds display
  • Optional 1.75" Rackmount enclosure (option "P")
  • 220-240 VAC (110-120 VAC is standard) & UL options available

Options

  1. C: Crystal Time Base: A crystal reference is employed for those applications requiring independence from the line frequency. A trimming function is included for greater accuracy (2-3 seconds/week).
  2. Clear: Clear Anodized Front Panel
  3. D Remote Control: This option consists of a connector wired to switches on a control plate via a six-foot cable. Extra cable available.
  4. J: 220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
  5. N Reverse Count at Zero: Changes count direction from Down to Up at Zero.
  6. P: 19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep.
  7. P2 Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel. Must be ordered in place of option 'P' if specifying option 'D'.
  8. Q Console Mount: The unit is housed in an enclosure 8" deep, front panel is 3.5" x 9", 1/8" clear anodized aluminum. 'Q' can only be ordered if option 'D' is included.
  9. R Remote Input: Rear-mounted connector for Remote Control. Specify the ES-362U if option 'R' is required.
  10. S Parallel BCD Slave: Parallel BCD Slave for use with old style BCD Outputs.
  11. T Tenths of Seconds: Tenths of Seconds LED Display added.
  12. UL: "UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
  13. Y Relay Closure at Zero: Reed Relay for Control Applications (10W max load; 500ma switching current).
  14. Z: Stop with reed relay closure at Zero (10W max load; 500ma switching current)