Overview
ESE ES-562UE Clock & Timer
The ES-562UE (12 hour) is a six digit Clock and a 100 Hour Up/Down Timer combined in one unit. The display and dual-function pushbutton controls are switchable between the Clock and Timer functions. The Clock and Timer are separate from each other and maintain their own memory. Dual-function Set/Stop, Select/Reset controls, along with Clock/Timer mode controls and Timer Up/Down momentary toggle switch are provided on the top of the case.
- .56" Yellow LED Display
- Independent Time-of-Day Clock and 24 Hour Up & Down Timer
- Single Display Switchable between Clock and Timer
- 12 Hour (ES-562UE) or 24 Hour (ES-564UE) Clock
- Optional ESE Time Code Output to Drive Remote Displays (Option ESE)
- Optional Remote Control Input (Option R)
- Optional 1.75" Rackmount Enclosure (Option P)
- 220-240 VAC (110-120 VAC is standard) & UL Options Available
Specifications / Documents
- Power: 5 Watts
- Electrical: 117 VAC, 50/60Hz
- Line Cord: 2-wire, 6’
- Enclosure: Desk Top
- Mechanical (HxWxD): 2.5” x 8” x 6”
- Controls: Push-buttons
- # of Digits: Six (Hr-Min-Sec)
- Display Height: .56” Yellow
- Viewing Distance: 20 feet
- Format: 12 hour
Options
- Black Black Anodized Front Panel. Available with options 'P','P2' or 'Q'.
- C Crystal Time Base: A crystal reference is employed for those applications requiring independence from the line frequency. A trimming function is included for greater accuracy (2-3 seconds/week).D Remote Control: This option consists of a connector wired to switches on a control plate via a six-foot cable. Extra cable available.
- ESE ESE Time Code Output: An ESE Time Code output is provided allowing the unit to drive ESE Time Code Slaves.
- J 220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
- N Reverse Count at Zero: Changes count direction from Down to Up at Zero.
- P 19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep.
- P2 Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel.
- Q Console Mount: The unit is housed in an enclosure 8" deep, front panel is 3.5" x 9", 1/8" clear anodized aluminum.
- R Remote Input: Rear-mounted connector for Remote Control.
- RS RS-232C Output: Computer Interface allows the time code data to be shared with a computer.
- UL "UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
