Overview
Excalibur CDA-2, One-In/Four Out, Composite DA
The Excalibur CDA-2 is a one-in four-out distribution amplifier for stereo composite or SCA subcarrier signals. Its performance is appropriate for use with the newest highest-performing stereo generators, STL’s and exciters.
Specifications / Documents
- Frequency Response: DC-100kHz, ±0.2 dB ( < 0.05 db down at 53 kHz)
- Distortion: < 0.01% THD
- Noise: > 90 dB below 4 Volts output, unity gain
- Gain: individually adjustable, -20 dB to +6 dB
- Connectors: BNC
- Source Impedance: should be fed from < 1 kΩ
- Load Impedance: should be > 250 Ω
- Drive Capability: up to 75 feet RG-58 coax (if load < 500Ω)
- Maximum Level:5 Volts RMS, input & output
- Size: 4-1/8” wide, 1-5/8” high, 5-1/4” deep (with BNCs)
- Power: 5VDC, 1A, 2.1mm I.D. x 5.5mm, center-positive wall transformer
