RDL EZ-HDA4B 1x4 Stereo Heaphone Distribution Amp Rear Outs

MSRP: $286.58
$214.94
Write a Review
SKU:
RDL-EZHDA4B
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability
Type:
Headphone Amplifier

Overview

The EZ-HDA4B contains four stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on rear-panel MINI jacks. One stereo input signal feeds all the amplifiers. Stereo RCA jacks, a MINI jack and a 1/4" jack are provided for connecting the input source. The EZ-HDA4B is used in music stores, houses of worship, studios, museums, home component systems and commercial sound systems.

Features:

  • One Stereo Input to Four Stereo Outputs
  • Unbalanced Inputs on Rear Panel
  • Input on MINI, 1/4" (6.3 mm) or RCA Jacks
  • Headphone Outputs on Rear Panel
  • Outputs on MINI Jacks
  • Front-Panel LEVEL Control for Each Output

Advantages:

  • Gold-Plated RCA Input Connectors
  • Each Output is Driven Separately
  • Knobs for Easy Level Adjustment

Specifications

Inputs (3):
 
Stereo on dual RCA jacks, stereo mini jack or 1/4” (6.3 mm) TRS, > 10 kΩ, -10 dBV nominal, +8.5 dBV max. (RCA and 1/4”), -16 dBV nominal, +2 dBV max. (Mini)

Outputs (4):
 
Stereo on Mini jacks (rear panel), 60 mW (100 Ω load)

Level control:
 
Off to +2.5 dB gain (RCA and 1/4” inputs, 100 Ω output load), Off to +9 dB gain (Mini input, 100 Ω output load)

Frequency Response:
 
20 Hz to 50 kHz (±1.5 dB, 100 Ω load)

THD+N:
 
< 0.1% (10 mW output, 100 Ω load)

Crosstalk:
 
< -75 dB (1 kHz)

Noise:
 
< -95 dB (below 10 mW output, 100 Ω load, maximum gain)

24 Vdc power supply current:
 
40 mA (idle), 65 mA (max.)

Case dimensions:
 
5.75” (14.6 cm)W x 3” (7.6 cm)D

Mounting size:
 
1/3 rack width.

Package Type:
 
Cardboard Box

Package Dimensions:
 
9.5 x 7 x 2.25 in.

Shipping Weight:
 
0.975 lbs.

WEEE weight:
 
0.575 lbs.

Tariff code:
 
8543.70.9960

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.