RDL EZ-HK2 Composite Video Hum Killer

MSRP: $175.09
$131.31
Write a Review
SKU:
RDL-EZHK2
Availability:
Normally Ships From Manufacturer, Contact us for Pricing and Availability
Type:
Hum Eliminators

Overview

The EZ‑HK2 is a superior-quality video transformer isolation module for use with standard 75 ohm composite video. Input and output connections are provided on gold-plated RCA jacks.

The shield connection of the INPUT jack is electrically isolated from the case and from the output ground. The shield connection of the OUTPUT jack is connected to the case shield through a rear-panel ground-lift switch.

The EZ-HK2 eliminates hum due to ground loops when it is installed between a video source, such as a computer or DVD player, and the input of a grounded video monitor or projector in an A/V or video system.

Features:

  • Video Ground-Loop Hum Elimination
  • 75 Ohm Composite Video Galvanic Isolation
  • Input and Output RCA Jacks
  • Switch-Selectable Ground Lift for Output Jack
  • Portable Use or Permanent Installation

Advantages:

  • Gold-Plated Connectors
  • Ground-Lift Switch
  • Excellent low and high video frequency response

Specifications

 
Input:
Composite Video, 1 V p-p nominal, ground-isolated
 
Input Impedance:
75 Ω
 
Input / Output Connectors:
RCA Phono
 
Output:
Composite Video, 1 V p-p nominal
 
Output Impedance:
75 Ω
 
Output Ground Isolation:
Switch-selectable
 
Gain:
Unity nominal (passive circuit)
 
Video Bandwidth:
40 Hz to >5 MHz
 
Case dimensions:
2.9” (7.4 cm)W x 3” (7.6 cm)D
 
Mounting size:
1/6 rack width
 
Package Type:
Cardboard Box
 
Package Dimensions:
3.625 x 4.625 x 2.125 in.
 
Shipping Weight:
0.395 lbs.
 

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.