RDL EZ-HSX4 4x1 Stereo Audio Switcher w/Headphone Amp

MSRP: $312.83
$234.62
Write a Review
SKU:
RDL-EZHSX4
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability
Type:
Headphone Amplifier

Overview

The EZ-HSX4 is a stereo audio source selector with an output volume control. Line-level and headphone outputs are provided. This unit is ideal as a four input headphone amplifier and as a source selector feeding an associated audio amplifier. The EZ-HSX4 is used in stores, houses of worship, studios, sound booths, home component systems and commercial sound systems.

Features:

  • Four Input Source Selection
  • Unbalanced Stereo Audio Inputs and Output
  • Inputs and Line Output on Rear-Panel RCA Jacks
  • Line Output Switchable Fixed (Unity Gain) or Variable
  • Variable Output Follows Front-Panel Level Control
  • Headphone Output on 1/4" (6.3 mm) and MINI Jacks
  • Headphone Output Follows Front-Panel Level Control
  • Full-Size Interlocking Pushbuttons on Front Panel

Advantages:

  • Easy-to-Push Large Buttons
  • Solid-State Audio Switching
  • Switch Noise Cannot Affect Signal Quality

 

Specifications

 
Inputs (4):
Stereo on dual RCA jacks, > 10 kΩ, -10 dBV nominal, +10 dBV max.
 
Level control:
Off to +12 dB gain
 
Outputs (3):
Stereo on dual RCA jacks (line level, -10 dBV nominal, +10 dBV max. fixed, +17 dBV max. variable), 1/4” (6.3 mm) TRS or Mini jack (2 headphone, 35 mW, 100 Ω load)
 
Frequency Response:
10 Hz to 20 kHz (line output ±0.05 dB, headphone output ±1.25 dB, 100 Ω load)
 
THD+N:
< 0.03% (line output), < 0.1% (headphone output, 10 mW, 100 Ω load)
 
Crosstalk:
< -70 dB (1 kHz)
 
Noise:
< -100 dB (headphone, below 10 mW output, 100 Ω load)
 
Noise:
< -80 dB (variable output, below -10 dBV, unity gain), < -95 dB (fixed output, below -10 dBV)
 
24 Vdc power supply current:
40 mA (idle), 50 mA (max.)
 
Case dimensions:
5.75” (14.6 cm)W x 5” (12.7 cm)D
 
Mounting size:
1/3 rack width
 
 

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.