RDL EZ-PD3 Power Supply Distributor

MSRP: $180.87
$135.66
Write a Review
SKU:
RDL-EZPD3
Availability:
Ships From Manufacturer, Contact us for Price and Availability

Overview

The EZ-PD3 is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to three EZ modules from a single power supply. Upon application of power, the EZ-PD3 ramps the voltage up, charging any load capacitance as quickly as possible, then switching full voltage to the load. A front-panel power switch is provided. The front-panel blue LED remains illuminated when the outputs are active.

Features:

  • Distribution of 24 Vdc Power
  • Soft-Start from Switching Supply
  • Outputs may be Activated by a Front-Panel Switch
  • Up to 3 Power Distribution Points
  • Voltage Presence Indication
  • Reverse Voltage Protection
  • Energy Efficiency by Powering Multiple Products from a Single Power Supply

Specifications

Input/Output Voltage:
24 Vdc @ 600 mA (Intended for use with current limited switching supply)
 
Outputs (3):
Total load current must not exceed 600 mA
 
Indicator:
POWER LED
 
Ambient Operating Environment:
0° C to 55° C
 
Power Requirement:
24 Vdc @ 20 mA plus connected loads
 
Package Type:
Cardboard Box
 
Package Dimensions:
3.625 x 4.625 x 2.125 in.
 
Shipping Weight:
0.675 lbs.
 

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.