RDL EZ-PH1 Stereo Phono Preamplifier

MSRP: $191.48
$143.61
(You save $47.87 )
Write a Review
SKU:
RDL-EZPH1
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability
Type:
Phono Pre
Adding to cart… The item has been added

Overview

The EZ-PH1 is a stereo phono preamplifier with front-panel volume trimmers and audio level metering. Stereo RCA jacks and a grounding screw are provided on the rear panel for connecting a turntable tone arm. The input is preamplified with RIAA equalization to feed the line output RCA jacks. Left and right channel front-panel LED VU metering facilitates adjustment of the level trimmers. The EZ-PH1 is ideal to add phono inputs to mixers and amplifiers with line inputs, or for direct connection to recording decks for dubbing records onto other media. It is used in clubs, educational facilities and studios.

Features:

  • Phono Input on Gold-Plated RCA Jacks
  • Line Output on Gold-Plated RCA Jacks
  • Front-Panel GAIN Trimmer for Each Channel
  • Dual-LED VU Meter for Each Channel
  • RIAA Equalization
  • Turntable Grounding Screw Provided

Advantages:

  • Gold-Plated Connectors
  • Adapt Turntable to an Amplifier Line Input
  • Feed a Turntable into a CD Recorder

Specifications

Input:
 
47 kΩ on stereo RCA jacks

Input Level:
 
-18 dBV max.

Gain:
 
OFF to +55 dB (1 kHz)

Output:
 
-10 dBV nominal on stereo RCA jacks

Equalization:
 
RIAA

Frequency Response:
 
20 to 20 kHz (±0.75 dB referred to RIAA curve)

Crosstalk:
 
< -75 dB (1 kHz)

Metering:
 
Dual-LED VU Meter for Left and Right, calibrated to -10 dBV output

THD+N:
 
< 0.05% (20 to 20 kHz, 36 dB gain)

Noise:
 
< -74 dB (36 dB gain, 1 kHz), < -80 dB (36 dB gain, 1 kHz, “A-weighted”)

24 Vdc power supply current:
 
30 mA (idle), 45 mA (max.)

Case dimensions:
 
2.9” (7.4 cm)W x 3” (7.6 cm)D

Mounting size:
 
1/6 rack width

Package Type:
 
Cardboard Box

Package Dimensions:
 
4.375 x 7 x 2.25 in.

Shipping Weight:
 
0.67 lbs.

WEEE weight:
 
0.395 lbs.

Tariff code:
 
8543.70.9960

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.