RDL FP-BUC2 Balanced to Unbalanced Converter 2 Channel

RDL FP-BUC2 Balanced to Unbalanced Converter 2 Channel

MSRP: $334.80
$251.10
Write a Review
SKU:
RDL-FPBUC2
Availability:
Normally Ships From Manufacturer, Contact us for Pricing and Availability
Type:
Balanced / Unbalanced

Overview

The FP-BUC2 is the ideal choice for connectorized conversion from balanced to unbalanced audio. This module features two identical active (transformerless) channels. Gold contact XLR jacks are utilized for the balanced input channels. Each output is unbalanced, connected through a gold-plated phono jack. A level trim potentiometer is provided for each channel.

The FP-BUC2 circuitry features low-noise, low-distortion and excellent headroom and crosstalk performance and the superior audio clarity for which RDL products are known. The FP-BUC2's low profile and compact size permit mounting in confined spaces and in various locations in equipment racks.

Features:

  • Stereo Balanced to Unbalanced Audio Conversion
  • Connectorized Audio Converter
  • Output Level Trim
  • Low-Noise and Low-Distortion Conversion
  • Cabinet, Shelf or Rack Mounting
  • Convenience of RDL® FLAT-PAKs™

 

Specifications

 

  • Amps per FP-BUC2:2 identical circuits (stereo or dual mono operation)
  • Gain:± 6 dB (adjustable relative to −10 dBV output for +4 dBu input); (separate controls for each channel)
  • Input Level:−2 dBu to +10 dBu (for -10 dBV output)
  • Input Impedance:20 kΩ
  • Input Configuration:Balanced bridging
  • Output Level:-10 dBV
  • Output Impedance:75 Ω (drives 600 Ω or 10 kΩ unbalanced lines)
  • Output Configuration:Unbalanced
  • Frequency Response:10 Hz to 40 kHz (± 0.1 dB)
  • THD+N:< 0.005% (10 Hz to 40 kHz)
  • IMD:< 0.005%
  • Headroom:> 18 dB (at rated output level of -10 dBV)
  • Noise:< -90 dB (referred to -10 dBV, 20 Hz to 20 kHz)
  • Typ. −95 dB (rel. −10 dBV, “A-Weighted”)
  • CMRR:> 50 dB (20 Hz to 5 kHz)
  • Crosstalk:Better than -90 dB (20 Hz to 20 kHz)
  • Ambient Operating Environment:0° C to 55° C
  • Power Requirement:GROUND-REFERENCED, 24 Vdc @ 50 mA
  • Dimensions:Height: 1.29 in. 3.28 cm; Width: 3.25 in. 8.26 cm; Length: 4.07 in. 10.34 cm
  • Package Type:Cardboard Box
  • Package Dimensions:3.625 x 4.625 x 2.125 in.
  • Shipping Weight:0.735 lbs.

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.