RDL FP-VDA4 NTSC/PAL Video Distribution Amplifier - 1x4 - BNC

MSRP: $389.73
$292.30
Write a Review
SKU:
RDL-FPVDA4
Availability:
Ships From Manufacturer, Contact us for Pricing and Availability
Type:
Distribution Amplifier

Overview

The FP-VDA4 is the ideal choice in many applications where video signals need to be distributed. Video input and output connections are made on the top-panel BNC jacks. Power connections are made using either the full-size barrier block terminals or a dc power jack located in one end panel. A second dc power jack is provided on the other end panel for connecting additional FLAT-PAK modules.

The FP-VDA4 has two jacks in the bridging input stage. One jack is for the input signal; the other is a loop-through output of the source signal. If 75 Ω termination of the input signal is required, the terminator (provided) is plugged onto the LOOP OUT jack. Gain is user adjustable from the top panel. The GAIN potentiometer allows adjustment from unity to +6 dB. Four source-terminated outputs are provided through the BNC output jacks. Unused outputs need not be terminated.

Features:

  • Video Distribution with Four Outputs
  • Adjustable Gain
  • Input LOOP OUT Jack
  • Wide Bandwidth - Flat to 10 MHz
  • NTSC or PAL Operation
  • Ultra-Compact All Metal Construction
  • Convenience of RDL® FLAT-PAKs™

Specifications

Input Impedance:
 
1 kΩ (Bridging 75 Ω Line)

Gain:
 
Unity to +6 dB (adjustable)

Load Impedance:
 
75 Ω

Outputs (5):
 
1 LOOP OUT from Input Signal; 4 amplified outputs

Output Level:
 
1 V p-p (into 75 Ω)

Frequency Response:
 
10 Hz to 10 MHz (± 0.2 dB)

Noise:
 
< -75 dB (below 1 V p-p)

Output Isolation:
 
> 45 dB

Differential Gain:
 
0.1%

Differential Phase:
 
0.1 degree (measured at 10% and 90% APL)

Connector Type:
 
BNC

Ambient Operating Environment:
 
-10° C to 55° C

Power Requirement:
 
GROUND-REFERENCED, 24 Vdc @ 60 mA

Dimensions:
 
Height: 1.34 in 3.40 cm; Width: 3.25 in 8.26 cm; Length: 4.43 in 11.25 cm

Package Type:
 
Cardboard Box

Package Dimensions:
 
3.625 x 4.625 x 2.125 in.

Shipping Weight:
 
0.705 lbs.

WEEE weight:
 
0.505 lbs.

Tariff code:
 
8543.70.9960

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.