Horita BSG-50 Blackburst, Sync Pulse, & Audio Tone Generator

MSRP: $420.42
Write a Review
SKU:
HOR-BSG50
Availability:
Ships from Manufacturer, Contact us for Pricing and Availablity

Overview

BSG-50 Blackburst, Sync Pulse, & Audio Tone Generator

The BSG-50 provides an economical means for generating the most common SD analog composite video reference timing signals required to operate various SD analog composite video switchers, effects generators, VTRs/VCRs, cameras, video edit controllers, and other professional video equipment.

The BSG-50 provides an economical means for generating the most common SD analog composite video reference timing signals required to operate various SD analog composite video switchers, effects generators, VTRs/VCRs, cameras, video edit controllers, and other professional video equipment.

  • 6 BNC outputs on Desktop model, 8 BNC outputs on Rackmount and Short Rack models. 
  • Choose any output mix from 6 blackburst, 4 sync, and 2 subcarrier.
  • Output signals are easily configurable to meet specific user/equipment needs.
  • Each video output signal is individually settable as composite sync, composite blanking, H drive or V drive. Burst flag is also available.
  • Separate buffer for each output provides maximum signal isolation.
  • Adjustments provided for setup, sync, and burst levels and SC/H phasing.
  • 1Khz, OdB sine wave audio tone reference output (unbalanced).
  • Available in 30-frame format.
  • Available in NTSC RS-170A and PAL 625/50 models
  • Rugged aluminum desktop enclosure measures 1.75"high, 4.7"long, 3.8"wide.
  • Also available in standard 19" Rackmount and Horita 7.5" "Short Rack" packages.

Specifications

  • Power: Operation 9-to-13.5V DC, 100 milliamperes
    Connector: 3.5 MM mini phone jack
    AC Adapter: 9 volt, 500 milliamperes
  • Blackburst Output:
    Standard: RS-170A
    Amplitude: Equivalent to 1 volt p-p video signal with 75 ohm load
    Setup: +7.5 IRE units, adjustable from 0 to +10 IRE units
    Adjustments: Sync amplitude, burst amplitude setup level, subcarrier frequency, SCH.
  • Sync Pulse Outputs
    Type Composite: sync, composite blanking, horizontal drive, vertical drive
    Amplitude: -4 volts with 75 ohm load
    Standard: RS-170A
  • Subcarrier Output
    Amplitude: 2.5 volts p-p with 75 ohm load
    Frequency 3.579545 MHz + 10HZ adjustable, basic crystal stability 15 PPM0C to 50C, 10 ppm per year
    Phase: Adjustable with SCH adjustment
  • Audio Tone Output
    Type: 1 KHz +2% crystal controlled sine wave
    Amplitude: 0dB =775mV RMS=0dBm/0dBu, adjustable for OdB=1.0V RMS =OdBV Output
    Impedance: Less than 20 ohms
    Adjustments: 1 KHz amplitude
  • Connectors
    Blackburst,Sync Pulse,Subcarrier: BNC
    Audio Tone: RCA