RDL HR-DDA4 1x4 Digital Audio Distribution Amp

MSRP: $1,210.17
$907.63
Write a Review
SKU:
RDL-HRDDA4
Availability:
Ships From Manufacturer, Contact us for Pricing and Availability
Type:
Distribution Amplifier

Overview

The HR-DDA4 is the ideal choice in installations requiring high quality distribution of a digital audio signal. The input and each of the four outputs support AES/EBU, S/PDIF or AES-3ID formats. The HR-DDA4 automatically detects a valid input on any of the four input jacks: S/PDIF optical, S/PDIF coaxial, AES-3ID or AES/EBU. The input is decoded, reclocked and retransmitted to four individually buffered outputs. Front-panel LEDs display the digital audio format and sample rate of a valid source received without any phase-lock or bit errors.

Each output is switch-selectable to provide an AES/EBU, S/PDIF coaxial or AES-3ID output. The switch enables the appropriate output jack and any required electrical and data format conversion. The AES/EBU input and outputs are 110 Ω terminated; the S/PDIF coaxial and AES-3ID jacks are 75 Ω terminated.

The HR-DDA4 is powered from 24 Vdc, which may be connected through the detachable terminal block or through the dc power jack. A front-panel power switch is provided.

RDL's proprietary Sure-Lok auto recovery supervision monitors possible causes of latch-up and reinitiates digital signal lock, bringing a high level of stability to digital audio signal distribution under the variety of conditions encountered in professional environments.

Features:

  • 1 x 4 Digital Audio Distribution for All Formats
  • Input: AES/EBU, Coaxial or Optical S/PDIF, AES-3ID
  • Each Output: AES/EBU, S/PDIF or AES-3ID
  • Format Conversion for Selected Output Format
  • Operation Up to 24 bits, 192 kHz
  • Exclusive Sure-Lok™ Auto-Recovery Sentinel
  • Transformer Isolated AES/EBU Input and Outputs
  • Digital Signal Reclocking
  • Sample Rate Indicator
  • Digital Signal Lock Indicator for Each Input Format

 

Specifications

Inputs (4):
 
110 Ω AES/EBU XLR, transformer isolated;
S/PDIF optical; 75 Ω S/PDIF coaxial phono jack; 75 Ω AES-3ID BNC

Outputs (12):
 
110 Ω AES/EBU XLR (4), transformer isolated;
75 Ω S/PDIF coaxial phono jack (4);
75 Ω AES-3ID BNC (4)

Selector (4):
 
Rear-panel output format selector (1 per output)

Sample Rate:
 
32 kHz to 192 kHz

Resolution:
 
16 to 24 bits

Indicators (12):
 
POWER LED; INPUT FORMAT LEDs (2); Sample Rate LEDs (9)

Standards:
 
AES3-2003, IEC60958

Ambient Operating Environment:
 
0° C to 50° C

Power Requirement:
 
GROUND-REFERENCED 24 Vdc @ 50 mA

Package Type:
 
Cardboard Box

Package Dimensions:
 
9.5 x 7 x 2.25 in.

Shipping Weight:
 
2.515 lbs.

WEEE weight:
 
2.16 lbs.

Tariff code:
 
8543.70.9960

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.