Overview
Shure KSM32/SL Large-Diaphragm Cardioid Condenser Microphone (Champagne)
The Shure KSM32 offers an extended frequency response for an open, natural sounding reproduction of the original sound source. An embossed single-diaphragm, side-address, cardioid condenser microphone for highly critical studio recording and live sound productions.
- Class A, transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity across the full frequency range.
- Embossed, high-compliance diaphragm provides extended low-frequency response.
- Ultra-thin, gold-layered, low-mass, Mylar® diaphragm for excellent transient response
- 15 dB attenuation switch for handling extremely high sound pressure levels (SPL)
- Switchable low-frequency filter provides greater flexibility to reduce background noise or to counteract proximity effect.
- Integrated three-stage pop protection grille reduces "pop" and other breath noise
- Internal shock mount reduces transmission of handling noise
Specifications
Microphone
| Primary Applications | Live Sound, Studio Recording |
| Form Factor | Large Diaphragm Mic / Stand/Boom Mount |
| Intended Sound Sources | Vocals, Acoustic Guitar, Acoustic Bass, Piano, Drums, Percussion, Overhead, Brass, Woodwinds, Room Ambiance |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | 1 x Condenser |
| Polar Pattern | Cardioid |
| Orientation | Side Address |
| Circuitry | Solid-State |
| Pad | -15 dB |
| High-Pass Filter | 80 Hz, 18 dB/Octave 115 Hz, 6 dB/Octave |
| Tone Adjustment | None |
| Gain Adjustment | None |
| Indicators | None |
| On-Board Controls | High-Pass Filter, Pad |
| Windscreen | Built-In |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 154 dB SPL (2.5-Kilohms Load, with Pad) 139 dB SPL (2.5-Kilohms Load) 148 dB SPL (1-Kilohm Load, with Pad) 133 dB SPL (1-Kilohm Load) |
| Impedance | 150 Ohms |
| Sensitivity | -36 dBV/Pa at 1 kHz (Open Circuit Voltage) |
| Output Level | 9 dBV (Max) |
| Dynamic Range | 126 dB (1 kHz, 2.5-Kilohms Load) 119 dB (1 kHz, 1-Kilohm Load) |
| Signal-to-Noise Ratio | 81 dB A-Weighted |
| Equivalent Noise Level | 13 dB A-Weighted |
| THD | < 0.08% |
| CMRR | 50 dB |
Connectivity
| Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
| Headphone Connector | None |
Power
| Operating Voltage | 11 to 52 V (Phantom Power) |
| Operating Current Consumption | 4.7 mA |
Physical
| Color | Silver |
| Mounting | Mic Clip/Stand Adapter, Shockmount (Included) |
| Included Case | Hard Case, Mic Sock |
| Included Filters | None |
| Dimensions | ø: 2.2 x L: 7.37" / ø: 5.6 x L: 18.72 cm |
| Weight | 17.3 oz / 490.46 g |
Documents
