Lectrosonics DCHR, Camera Mount Portable Receiver - 470 to 614 MHz

Lectrosonics DCHR, Camera Mount Portable Receiver - 470 to 614 MHz

The DCHR portable digital stereo receiver is designed for use in film and TV production as both a wireless stereo audio link from a bag or cart system to cameras using a DCHT or M2T transmitter, or as a stand-alone miniature receiver for use with D Squared series mono transmitters. The DCHR provides two channels of mic or line level analog signals or an AES3 digital signal via a locking TA5M connector. The digital architecture of the DCHR is a 4th-generation design with specially developed, high-efficiency circuitry for extended operating time on two AA batteries.

The DCHR can tune across the available UHF TV band from 470 to 614 MHz (470-608 MHz when NA Locale is selected) in 100 kHz or 25 kHz steps, offering more than 6000 frequencies. The digital architecture allows for AES256-CTR encryption for applications where content security is a concern, and provides four different encryption key policies for a variety of applications. The DCHR can be camera mounted using the optional LRSHOE accessory.

• Compatible with DBSM, DBu, DHu, DPR, DCHT and M2T Transmitters
• Selectable AES3 or analog mic/line level outputs
• 256-bit encryption – AES 256-CTR
• USB port for firmware updates
• Two AA battery power
• Solid machined aluminum housing
• Optional powering from external DC with LTBATELIM
• Extremely fast RF scanning and setup via IR

Includes:

• Wire Belt Clip
• (2) AA Batteries
• (2) AMJ-19 SMA-mount antennas
• (2) AMJ-22 SMA-mount antennas

• Operating Frequencies: 470.100 - 614.375 MHz
• Operating temperature range: -20 to 50°C; -5 to 122°F
• Modulation Type: 8PSK with Forward Error Correction
• Audio Performance:
  • Frequency Response:
    • D2 mode: 25 Hz - 20 kHz, +0\-3dB
    • Stereo modes: 20 Hz - 12 kHz, +0\-3dB
  • THD+N: 0.05% (1kHz @ -10 dBFS)
  • Dynamic Range: >95 dB weighted
  • Adjacent Channel Isolation >85dB
  • Diversity Type: Switched antenna, during packet headers
• Audio Output:
  • Analog: 2 balanced outputs
  • AES3: 2 channels, 48 kHz sample rate
  • Headphone Monitor: 3.5 mm TRS jack
  • Level (line level analog): -50 to +5dBu
• Latency:
  • D2 mode: 1.4 ms
  • Stereo modes: 1.6 ms
• Power requirements: 2 x AA batteries (3.0V)
• Battery life: 8 hours; (2) Lithium AA
• Power consumption: 1 W
• Dimensions (H x W x D): 3.34 x 2.44 x .75 in. (85 x 62 x 19 mm)
• Weight: 9.14 ounces / 259 grams (with batteries)