Overview
LYNX Technik Yellobrik OBD 1514 E, Matched Pair of 1Gb Ethenet to Fiber Transceivers
The OBD 1514 E is a matched pair of compact Ethernet switches designed to extend the reach of 1GbE signals over long distances. The two switches are linked via simplex bi-directional fiber which operates at a constant 1Gbit/s speed.
This pair of modules uses WDM (Wavelength-devision Multiplexing) fiber technology in a closed loop environment, It functions as a simple Ethernet extender solution. The fiber link supports distances up to 10km* and provides a single, high speed 1Gbit/s error-free optical connection between the two locations.
Features
Each OBD 1514 E module has two standard RJ45 Ethernet ports. The complete system functions as a 4 ports Ethernet switch, providing two standard RJ45 Ethernet ports at each end bridged with fiber. For legacy systems, each Ethernet port can be set for automatic speed detection (10/100/1000) or forced to 10 Mbit/s. Each port uses auto crossover detection or can be forced manually if needed. These functions are available using the dip switch located on the device.
- Bidirectional send and receive over single fiber link
- Supports standard ethernet inputs up to 1 Gbit/s
- Closed loop WDM fiber system
- 3 port ethernet switch (1 fiber, 2 electrical)
- Auto (10/100/1000) port speed detection
- Manually force 10Mbit/s electrical speed (if needed)
- Fiber transceiver speed always 1 Gbit/s
- Auto or manual electrical crossover selection
- Distances up to 10km(6.2 miles)* over singlemode fiber
Specifications / Documents
Ethernet
- 2 x Ethernet ports, RJ 45 Connectors.
- 10 BaseTUTP category 3,4 or 5 cable up to 328ft/100m (2 pairs)
- 100 BaseTXUTP category 5 cable up to 328ft/100m (2 pairs)
- 1000 BaseTXUTP category 5 cable up to 328ft/100m (4 pairs)
- Auto detect bit rate (10/100/1000), or force to 10Mbit for each port (selectable)
- Automatic crossover detection or force manually for each port (selectable)
- Port speed / activity LED indication (next to Ethernet port)
Fiber Optic
- 1 x fiber optic input/output per module Simplex (Single mode) using LC/PC Connections
- Type A: OH-BD-51-1310-LC
- Type B: OH-BD-51-1550-LC
- IEEE 802.3z (1000BASE-X Gbit/s Ethernet over Fiber at 1 Gbit/s (125 MB/s)
- TX and RX active LEDs on side of module
- Max. distance approx. 10km* (6.2 miles - Singlemode)
