LYNX Technik Yellobrik OET 1514, 1Gb Ethenet to Fiber Transceiver

MSRP: $571.00
$542.45
Write a Review
SKU:
LYN-OET1514
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability
Adding to cart… The item has been added

Overview

LYNX Technik Yellobrik OET 1514, 1Gb Ethenet to Fiber Transceiver

The OET 1514 is a compact 3 port Ethernet switch, designed to extend the reach of electrical Ethernet signals over long distances using a constant (fixed) high speed 1 Gbit/s optical transceiver speed.

When paired with another OET 1514 at the receiving end (using two fiber links) you have a cost effective Ethernet extender system for distances up to 10km providing a stable, high speed 1Gbit/s error free optical connection between locations.

Features

The OET 1514 has two standard RJ45 electrical Ethernet ports plus fiber I/O and functions as a 3 port Ethernet switch. For legacy system use: each electrical Ethernet port can be set for automatic speed detection (10/100/1000) or forced to 10Mbit/s, and each port can use auto crossover detection or be forced manually if needed. These functions are available using the dip switch.

  • Supports standard ethernet inputs up to 1 Gbit/s
  • 3 port ethernet switch (1 fiber, 2 electrical)
  • Auto (10/100/1000) port speed detection
  • Manually force 10Mbit/s electrical speed (if needed)
  • Fiber transceiver speed always 1 Gbit/s
  • Auto or manual electrical crossover selection
  • Distances up to 10km(6.2 miles)* over fiber
  • 2 SFP selections (Singlemode and Multimode)
  •  

Specifications / Documents

Ethernet

  • 2 x Ethernet ports, RJ 45 Connectors.
  • 10 BaseTUTP category 3,4 or 5 cable up to 328ft/100m (2 pairs)
  • 100 BaseTXUTP category 5 cable up to 328ft/100m (2 pairs)
  • 1000 BaseTXUTP category 5 cable up to 328ft/100m (4 pairs)
  • Auto detect bit rate (10/100/1000), or force to 10Mbit for each port (selectable)
  • Automatic crossover detection or force manually for each port (selectable)
  • Port speed / activity LED indication (next to Ethernet port)

Fiber Optic

  • 1 x fiber optic input (Range 1270-1610nm, Sensitivity -3dBm to -23dBm)
  • 1 x fiber optic output Duplex (Single mode) using LC/PC Connections
  • IEEE 802.3z (1000BASE-X Gbit/s Ethernet over Fiber at 1 Gbit/s (125 MB/s)
  • TX and RX active LEDs on side of module
  • Max. distance approx. 10km* (6.2 miles - Singlemode)