Decimator Design MD-QUAD Miniature Multiviewer Quad Split

$1,295.00
Write a Review
SKU:
DEC-MDQUAD
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability

Overview

MD-QUAD Miniature Multiviewer Quad Split

1 to 4 Channel Multi-Viewer / Quad-Split with SDI and HDMI outputs for 3G/HD/SD and Custom Layouts
  • Support both 3G level A and B on the input and output. Allowing conversion between 3G level A and B.
  • Professional 3G/HD/SD Test Pattern Generator featuring:
    • 26 Selectable Output Formats
    • 54 Test Patterns including Luma and Chroma Zone-plates
  • Audio Tone Generator
  • Horizontal and/or Vertical image flipping per window
  • Low cost miniature (3G/HD/SD)-SDI 1 to 4 channel Multi-Viewer or 4 to 1 input multiplexer
  • Custom Layouts with various standard layouts
  • 16 Character UMD overlay per window with individual enables, custom positioning and size
  • 8 Channel Audio Metering overlay per window with individual enables, custom positioning and size
  • Tallies can be applied to either Tally Boxes (Default) or Border
  • Tally boxes allows for up to 4 Tallies per window (Green, Red, Blue and Yellow)
  • Load and restore Custom Layouts
  • Fast switching between inputs using Full-Screen scaling
  • Selectable output format in both Full-Screen and Multi-Viewer mode
  • Low latency buffering for each input allowing non-synchronous inputs
  • Linked (3G/HD/SD)-SDI and HDMI outputs
  • 4 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
  • Variable aspect ratios per window
  • Pass-Through mode allowing any of the 4 inputs to be selected and routed to both the (3G/HD/SD)-SDI and HDMI outputs
  • An extensive selection of user controllable functions via a easy to use rotary encoder for menu selection. LEDs and a push button can then be used for status and control
  • USB port for control and updates
  • Locking DC Power Socket
  • 5 GPI on standard RJ-45 connector connector for Tallies and Remote Switching
  • RS422/485 is also include on the same RJ-45 connector for Dynamic UMD and Tallies via TSL protocol
  • The following is included with the unit:
    • Power Supply, HDMI Cable, USB Cable and Mounting Bracket

 

Specifications

  • SDI FORMATS
  • 3G: SMPTE 424M@2.97 and 2.967Gb/s
  • 1080p@60/59.94/50Hz
  • HD: SMPTE 292M/274M/296M@1.485 and 1.435Gb/s
  • 1080i@60/59.94/50Hz
  • 1080p/psf@30/29.97/25/24/23.98Hz
  • 720p@60/59.94/50/30/29.97/25/24/23.98Hz
  • SD: SMPTE 259M@270Mb/s
  • 625i50
  • 525i59.94

    INPUTS
  • Input Equalization > 100M using Belden 1694A
  • USB for control and updates
  • GPI on RJ-45

    LED STATUS
  • Power
  • 4 x Signal lock and rate

  • MENU OPTIONS
  • Input status for all 4 inputs
  • Output format
  • Output selection of Quad Split or input 1, 2, 3 or 4.
  • Output aspect and type of 16:9 or 4:3 at either 90 or 100% of screen size
  • Individual aspect format for each input of Same as output, Letter-box or Pillar-box
  • Border Enable
  • Quad split mode reference of either Free-run or input 1
  • Enables for On-Screen Overlays
  • Basic Audio Meter control

    INPUTS
  • Input Equalization > 100M using Belden 1694A
  • USB for control and updates
  • GPI on RJ-45

    OUTPUTS
  • 1 x 10-bit (3G/HD/SD)-SDI Re-clocked
  • HDMI

    DIMENSIONS
  • 90mm x 94mm x 23mm (3.5" x 3.7" x 0.9")

    POWER
  • +5V to +24V DC, 6 Watts
  • Positive Centre Pin