RDL PT-AMG2 Portable Audio Signal Generator & Monitor

MSRP: $575.00
$431.25
Write a Review
SKU:
RDL-PTAMG2
Availability:
Normally Ships From Manufacturer, Contact us for Pricing and Availability

Overview

This portable audio instrument is comprised of a precision audio oscillator, precision level meter and speaker.

The 700 Hz oscillator section features two outputs. The balanced XLR output is front-panel switch selectable for MIC or LINE level (pro level). The unbalanced output operates at -10 dBV (consumer). Output stability is suited to accurate bench top audio testing.

The audio metering circuit features two inputs, an LED meter and a monitor speaker. The balanced input is front-panel switch selectable for MIC or LINE input (pro). The unbalanced input operates at -10 dBV (consumer). Either input may be used to feed the metering circuit. For balanced +4 dBu inputs, meter 0 dB = +4 dBu. For unbalanced inputs, meter 0 dB = -10 dBV. A front-panel volume knob controls the speaker level. The IN PHASE LED illuminates when the oscillator output and metering input are in phase (0 dB level or greater). The PT-AMG2 operates either from two internal 9 volt batteries or from an external 12 Vdc to 30 Vdc supply. Test leads and bench top support bracket are included. The balanced line levels (input and output) may be preset by the user to +4 dBu or +6 dBu.

Features:

  • Portable or Bench Audio Generator, Meter and Monitor
  • Mic and Line-Level Audio Tone Oscillator with Metering
  • Selectable Mic / Line-Level Input and Output
  • Balanced and Unbal Connectorized Inputs/Outputs
  • Operation from Standard 9 Volt Batteries or 24 Vdc
  • +4 dBu or +6 dBu Precision Stable Reference Level

 

Specifications

Outputs (2):
 
XLR (front-panel selectable mic or line), Phono (consumer level)


Balanced Output Level (Selectable):
 
 

  Line:
 
+4 dBu or +6 dBu* (2.5 kΩ load)

  Mic:
 
-46 dBu (2.5 kΩ load, 50 dB below +4 dBu)

Unbalanced Output Level:
 
-10 dBV

Oscillator Frequency:
 
700 Hz nominal

Output Stability:
 
Better than 0.01 dB

Inputs (2):
 
XLR (front-panel selectable mic or line) Phono (consumer level)


Balanced Input Level (Selectable):
 
 

  Line:
 
+4 dBu or +6 dBu*

  Mic:
 
-46 dBu (50 dB below +4 dBu)

Unbalanced Input Level:
 
-10 dBV

*Reference Level Preset:
 
Switch-selectable +4 dBu or +6 dBu

Ambient Operating Environment:
 
0° C to 50° C

Power Requirement:
 
9 V internal (2) or 12 to 30 Vdc external @ 45 mA

Package Type:
 
Cardboard Box

Package Dimensions:
 
9.5 x 7 x 2.25 in.

Shipping Weight:
 
2.3 lbs.

WEEE weight:
 
1.62 lbs.

Tariff code:
 
8543.20.0000

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.