Overview
PYKO-in is a stereo IP audio encoder that can be used in two modes. One mode allows converting the analog audio source into an IP audio stream sent to one or several destinations. Typical applications include STL, WEB radio encoding, background music, and paging. Combined with PYKO-out, PYKO-in is a cost effective solution for establishing IP audio links. Another mode allows using PYKO-in as a mono encoder/decoder; typical applications include intercom over IP. PYKO-in is a small form factor rack-mountable stereo IP audio encoder or mono IP audio codec, depending on the way it is configured. Used as a stereo encoder, it features two balanced analog mono inputs. Used as a mono codec, it features one balanced analog mono input and one mono balanced mono output. One of the inputs offers a microphone preamp with phantom power, which is useful when PYKO-in is used for intercom. PYKO-in generates standard RTP streams in G711, PCM, or MPEG L3 audio format and allows for auxiliary data tunneling (serial data and 4 GPI statuses).
Specifications
BALANCED ANALOG AUDIO I/OS
- 1 stereo input / 1 mono I/O in full duplex-mode
- Left input Mic/line with 12V phantom power
- E.I.N (48 kHz, G=39 dB, Z=200 Ohms) <-115 dBm
- Maximum level / impedance
- Inputs: +4 dBu / +18 dBu / > 10 Kohms
- Mic level/impedance -2 dBu > 10 kohms
- Left output (full-duplex mode only): +4 dBu / +18 dBu / < 100 ohms
- Frequency response: 0/-2 dB <20-20000Hz>
- THD + Noise:
- input: < – 84dB @ -1 dBFS <20-20000Hz>
- output: < – 84 dB @ -2dBFS <20-20000Hz>
- SNR: <- 98 dB <20-20000Hz>
CONNECTORS
- Analog audio: Terminal block
- Network: 10/100 Mbit Ethernet (RJ45)
- RS232: SubD 9pin male
- GPIOs:
- Headphone out: 3.5 mm Jack
AUDIO FORMATS
- PCM 16bits, G.711, G722
- MPEG Layer 3 (VBR up to 192 kBit) (not in full-duplex)
