RDL DB-RLC10K Remote Level Control - 0 to 10 kΩ

RDL DB-RLC10K Remote Level Control - 0 to 10 kΩ

MSRP: $69.34
$52.00
(You save $17.34 )
Write a Review
SKU:
RDL-DBRLC10K
Availability:
Normally Ships From Manufacturer, Contact us for Pricing and Availability
Type:
Wallplate Level Control
Adding to cart… The item has been added

Overview

The DB-RLC10K is the ideal companion to the RDL VCA modules where levels are to be controlled from a single remote location. It is designed to directly interface with the 3-wire control input of the VCA module. The DB-RLC10K contains a high-quality 10 kΩ potentiometer for setting the control voltage.

The DB-RLC10K panel has 10 graphic increments which provide a visual indication of the level setting. The DB-RLC10K and RDL remote source selector may be mounted together in a double box/plate to form a visually appealing control of both audio source and audio level.

Three conductors are required for connection between the DB-RLC10K and an RDL VCA. A single shielded pair is normally used.

All the DB-RLC10K features combine to make it the optimum economical choice for single-point remote level control in high-quality systems. Use the DB-RLC10K individually with an RDL control module, or combine it side-by-side with other RDL remote accessories as part of a complete audio/video system.

Features:

  • Remote Level Control Panel
  • Single-Turn Rotary Control
  • Single Control Location
  • Direct Connection to RDL VCA Modules
  • Discrete Wiring Connections on Detachable Terminal Block
  • Available in Standard RDL White, Stainless or Black

Specifications

Resistance:
 
0 to 10 kΩ, linear
Connections:
 
Detachable terminal block
Ambient Operating Environment:
 
-10° C to 55° C
Mounting:
 
Mounts in US electrical box or RDL international wall boxes WB-1U, WB-2U; decorative plate available separately
Package Type:
 
Cardboard Box
Package Dimensions:
 
3.625 x 4.625 x 2.125 in.
Shipping Weight:
 
0.44 lbs.
WEEE weight:
 
0.295 lbs.
Tariff code:
 
8543.70.9960

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.