RDL DB-RLC3 Remote Level Control - Preset levels

MSRP: $264.09
$198.07
Write a Review
SKU:
RDL-DBRLC3
Availability:
Normally Ships From Manufacturer, Contact us for Pricing and Availability
Type:
Wallplate Level Control

Overview

The DB-RLC3 is designed to directly interface with RDL® control modules which feature a 0 to 10 Vdc control input utilizing an external 10 kΩ resistive control, such as the ST-VCA3, RU-VCA2A and RU-VA6A voltage controlled amplifiers. The DB-RLC3 has four momentary pushbuttons, each corresponding to one of four levels selected.

In a typical installation, the DB-RLC3 is wired to an RDL VCA. The DB-RLC3 runs from the same power supply as the VCA. When power is applied, the DB-RLC3 defaults to the NORM level. One higher level, HIGH, and two lower levels, LOW and MIN, are then available for selection. When the DB-RLC3 is set to the HIGH position, the VCA is at maximum gain. The NORM, LOW, and MIN levels are each adjustable by the installer using trimpots on each side of the DB-RLC3´s body. Once installed, the adjustments are concealed from the user.

Features:

  • Remote Selection of Preset Audio Levels
  • Pushbutton Level Selection
  • 4 Selectable System Levels, or 3 Levels Plus Off
  • LED Indication (Green)
  • Premium-Quality Remote Panel
  • Professional Aesthetic Appearance

Specifications

Interface:
 
Direct connection with RDL modules using 0 to 10 Vdc, 10 kΩ resistive control (see ST-VCA3, RU-VCA2)

Output:
 
Selectable resistance (CTRL Terminal ) to ground in 4 steps:

High:
 
10 kOhm, 0 dB

Norm:
 
Adjustable, -3 dB to -30 dB

Low:
 
Adjustable, -5 dB to -40 dB

Min:
 
Adjustable, -10 dB to Off

Connections:
 
Detachable terminal block

Ambient Operating Environment:
 
0° C to 50° C

Power Requirement:
 
Ground-referenced, 24 Vdc @ 30 mA

Mounting:
 
Mounts in standard US electrical box, RDL WB- or SMB- series boxes; cover plate available separately.

Dimensions:
 
Height: 4.1 in. (10.4 cm), Depth: 1.6 in. (4.10 cm) , Width: 1.3 in. (3.30 cm)

Package Type:
 
Cardboard Box

Package Dimensions:
 
3.625 x 4.625 x 2.125 in.

Shipping Weight:
 
0.375 lbs.

WEEE weight:
 
0.225 lbs.

Tariff code:
 
8543.70.9960

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.