RDL ST-PA6 6W Mono Audio Amplifier - 8 Ohm

RDL ST-PA6 6W Mono Audio Amplifier - 8 Ohm

MSRP: $184.53
$138.40
Write a Review
SKU:
RDL-STPA6
Availability:
Ships From Manufacturer, Contact us for Pricing and Availability
Type:
Power Amplifier

Overview

The ST-PA6 represents the second generation of RDLs® breakthrough in the traditional power vs. size ratio. Present technology permits features and performance at the most economical cost ever. The ST-PA6 offers 6 watts of power for a price you would expect to pay for 3 watts.

The ST-PA6 features two balanced audio inputs, a gain control, equalization control and an 8 Ω output. The output is designed to deliver a clean 6 watts RMS into an 8 Ω speaker. Each input is a balanced bridge, with the two inputs actively mixed equally. This is particularly useful for monitoring a stereo line. The output stage features protection against short-circuits and thermal overload. The output protection automatically resets once the condition is removed, making fuse protection unnecessary.

Features:

  • 6 Watts RMS into 8 Ω
  • Amplifier with Balanced Audio Inputs
  • Built-In 2-Input Mixer
  • Low-Noise and Low-Distortion Amplifier
  • Amplifier with Loudness Equalization

Specifications

Inputs (2):
 
100 kΩ balanced (may be wired balanced or unbalanced)
Input Level:
 
400 mV (RMS) minimum (for rated power output)
Frequency Response:
 
35 Hz to 20 kHz (± 1.5 dB w/EQ setting flat)
Equalization:
(Single-turn trimmer)
 
Flat to +5 dB @ 60 Hz (center frequency of boost)
Flat to +4 dB @ 100 Hz
Flat to +3 dB @ 120 Hz
THD+N:
 
< 0.35%
Noise:
 
< -60 dB
Output:
 
8 Ω unbalanced, 6 watts RMS
Ambient Operating Environment:
 
0° C to 40° C
Power Requirement:
 
GROUND-REFERENCED, 24 Vdc @ 400 mA
Package Type:
 
Cardboard Box
Package Dimensions:
 
2 x 2 x 4 in.
Shipping Weight:
 
0.205 lbs.
WEEE weight:
 
0.15 lbs.
Tariff code:
 
8543.70.9910

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.