Overview
The Shure BLX1288/CVL wireless system equips two people for wireless freedom, while offering rock-solid build quality and easy setup and operation. And thanks to Shure's cutting-edge QuickScan technology, frequency-selection hassles are a thing of the past, helping you get your show up and running that much faster. This system includes two microphones — the CVL lavalier microphone and the BLX2/PG58 handheld mic with built-in transmitter — as well as a BLX1 bodypack transmitter for the lav mic, and the BLX88 dual-channel receiver. When you need to perform with the freedom that only wireless allows, Shure's BLX wireless systems are a smart, affordable choice.
- User-friendly, high-performance wireless system
- BLX wireless supports up to 12 simultaneous channels
- BLX88 dual-channel receiver with easy one-touch setup
- BLX2/PG58 handheld microphone with built-in transmitter for vocalists and public speaking
- CVL lavalier microphone is ideal for interviews and theater performances
Specifications
| Wireless Technology | Analog UHF |
| Included Transmitters | 1 Bodypack 1 Handheld |
| Diversity | Antenna Diversity |
|
|
|
| RF Frequency Bands |
H10: 542 to 572 MHz H9: 512 to 542 MHz J10: 584 to 608 MHz |
|
|
|
| RF Bandwidth | 24 MHz |
| RF Channel Scanning | Auto-Scan |
| Max Operating Range | 300' / 91.4 m (Line of Sight) |
| Max Transmitters per Band | 12 |
| Dynamic Range | 100 dBA |
Receiver
| Receiver Type | Tabletop BLX88 |
| Antenna | 2 Internal, Fixed |
| Number of Audio Channels | 2 |
| Audio I/O | 2 XLR 3-Pin Male Balanced Output 2 1/4" TRS Female Balanced Output |
| Audio Output Level | XLR Outputs:-27 dBV (Mic Level) 1/4" Outputs:-13 dBV (Instrument Level) |
| Frequency Response | 50 Hz to 15 kHz (Dependent on Mic) |
| Impedance | XLR Outputs:200 Ohms 1/4" Outputs:50 Ohms |
| Approximate RF Sensitivity | -105 dBm |
| Power Requirements | AC/DC Power Adapter |
| AC/DC Power Adapter | 12 to 15 VDC at 160 mA, Center-Positive (Included) |
| Display & Indicators | 1 Multi-Segment LED (Channel, Group) 2 LED (AF Level, Sync) |
| Housing | ABS |
| Operating Temperature | 0 to 135°F / -17 to 57°C |
| Dimensions | 15.3 x 1.6 x 4.6" / 388 x 40 x 116 mm |
| Weight | 15.1 oz / 429 g |
Transmitter
| Transmitter Type | Bodypack BLX1 |
| RF Output Power | 10 mW |
| Audio I/O | 1 TA4/Mini XLR 4-Pin Male Input (Lockable) |
| Muting | Off/On Switch |
| Auto-Level Control | No |
| Gain Range | -16 to +10 dB |
| Sync Method | Manual |
| Antenna | 1 Flexible Whip, Fixed (Beltpack) |
| Power Requirements | Battery |
| Battery Type | 2 xAA (Included) |
| Approx. Battery Life | 14 Hours (Alkaline) |
| Display & Indicators | 1 Multi-Segment LED (Channel, Group) 1 LED (Battery Status, Power) |
| Housing | ABS |
| Dimensions | 2.5 x 4.3 x 0.8" / 64 x 110 x 21 mm |
| Weight | 2.6 oz / 75 g (without Batteries) |
Microphone
| Microphone Type | CVL Lavalier |
| Sound Field | Mono |
| Capsule | Electret Condenser |
| Polar Pattern | Cardioid |
| Frequency Range | 50 Hz to 20 kHz |
| SNR | 72 dB |
| Equivalent Noise Level | 22 dB |
| Maximum SPL | 139 dB SPL |
| Impedance | 600 Ohms |
| Dynamic Range | 117 dB |
| Output Connectors | 1 TA4/Mini XLR 4-Pin Female (Lockable) |
| Cable Length | 4.27' / 1.3 m |
| Operating Voltage | 5 V |
| Weight | 0.88 oz / 25 g |
Transmitter 2
| Transmitter Type | Handheld BLX2PG58 |
| RF Output Power | 10 mW |
| Muting | Off/On Switch |
| Auto-Level Control | No |
| Gain Range | -20 to -10 dB |
| Sync Method | Manual |
| Antenna | 1 Internal (Handheld) |
| Power Requirements | Battery |
| Battery Type | 2 AA (Included) |
| Approx. Battery Life | 14 Hours (Alkaline) |
| Display & Indicators | 1 Multi-Segment LED (Channel, Group) 1 LED (Battery Status, Power) |
| Housing | ABS |
| Dimensions | 2.5 x 4.3 x 0.8" / 64 x 110 x 21 mm |
| Weight | 7.7 oz / 218 g (without Batteries) |
Video
Documents
