Overview
Spinner BN 839180, 7/8" EIA Connector, Fits HJ7-50 Air Dielectric Cable
With a 7/8" EIA connector HJ7-50 air dielectric cable 1 5/8"-50, the cable clamp is pushed onto the trimmed inner and outer conductors, then the inner and outer conductors are flared. Finally, the connector head is placed on the cable end with the cable clamp and screwed on.
A 7/8" EIA connector HJ7-50 air dielectric cable 1 5/8"-50 is ideally suited for installation on air dielectric cable. The premium design with flared internal and external contacts ensures maximum reliability with high RF power. All connectors have sealed flanges and inlets for overpressure operation.
The connector has a straight direction.
Specifications / Documents
Requires BN 911715 Coupling Element (Bullet) for Male use
RF characteristics
- Number of interfaces:1
- Interface type: 7/8" EIA (50 Ω) per IEC 60339-2
- Interface direction: straight
- Mounting type: none
- Frequency range:DC to 2.7 GHz
- Average power rating: 3.5 kW @ DC to 900 MHz
- Peak power rating, max.: 90.0 kW
- Proof voltage rating: 6000 V
- VSWR, max.:1.02 @ DC to 1 GHz,1.04 @ 1 to 2.2 GHz, 1.06 @ 2.2 to 2.7 GHz
Mechanical characteristics
- Gas inlet: NPT 1/8"
- Cable entry type: clamped
- Suitable cable: Air dielectric 1 5/8"
- Cable manufacturer types: CommScope: HJ7-50A
- Inner conductor material / surface coating: copper-alloy / silver-plated
- Outer conductor material / coating: copper-alloy / silver-plated
- Insulation material: PTFE
- Sealing material: silicone rubber
- Degree of protection: IP 68
- Degree of protection remark: pressure-tight up to 4 bar/400 kPa
- Weight, approx.: 1.4 kg
