RDL ST-ACR1M Microphone Level Audio Controlled Relay - 0.5 to 5 s

RDL ST-ACR1M Microphone Level Audio Controlled Relay - 0.5 to 5 s

MSRP: $189.70
$142.27
Write a Review
SKU:
RDL-STACR1M
Availability:
Normally Ships From Manufacturer, Contact us for Pricing and Availability

Overview

Each of the ST-ACR products is an Audio Controlled Relay in the STICK-ON® series. These products are designed for quick, convenient installation, and reliable operation in a variety of control applications. The ST-ACR-1M is designed to switch on low-level sources, such as microphones or mic-level sources.

Two multiturn trimmers are provided. The SENS potentiometer adjusts the audio input sensitivity. A threshold LED facilitates accurate adjustment. The module can be set to trigger on signals between -65 dBu and -20 dBu. The DELAY control sets the time required for the relay to release when the audio drops below the threshold. The adjustment range is from 0.5 seconds to 5 seconds.

Features:

  • Switching Controlled by Audio Signal
  • Sensing of Microphone-Level Signal
  • Silence Sensing
  • DPDT Switching Contacts
  • Open-Collector SLAVE Output

 

Specifications

 
Audio Input:
10 kΩ balanced bridging
 
Input Connections:
May be connected balanced or unbalanced
 
Control Output:
Open-collector @ 25 mA suitable to drive indicators or slave LCR relay
 
Indicators:
Audio threshold LED (for setting sensitivity)
 
Retrigger delay:
250 ms
 
Contacts:
Double-pole-double-throw
 
Max. Switching Power:
60 W, (220 Vdc, 125 Vac, 2A)
 
Activation response time:
25 ms
 
Input Sensitivity:
-60 dBu to -20 dBu (adjustable)
 
Relay Release Delay:
0.5 sec. to 5.0 sec. nominal (adjustable)
 
Ambient Operating Environment:
0° C to 55° C
 
Power Requirement:
GROUND-REFERENCED, 24 Vdc @ 50 mA*
* Assumes 20 mA max load at SLAVE output
 
Dimensions:
Height: 0.7 in. (1.7 cm), Width: 3 in. (7.6 cm), Depth: 1.6 in. (3.9 cm)
 
Package Type:
Cardboard Box
 
Package Dimensions:
2 x 2 x 4 in.
 
Shipping Weight:
0.2 lbs.
 
 

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.