Each of the ST-OSC2 products is a Dual Audio Oscillator. These products are designed for quick, convenient installation, and reliable operation in a variety of audio applications.
- Low-impedance output drives virtually any audio line
- Outputs may be connected to either balanced or unbalanced lines
- Multiturn level adjustment permits precise output setting
- Separate output level control provided for each oscillator
- Integral AGC circuitry for stable output level
- Each oscillator has two separate outputs to drive stereo lines
The ST-OSC2 products feature RDL's SupplyFlex power input configuration. The module will operate directly from floating 24 Vdc or bipolar dc power. If a jumper is connected between the POWER minus terminal and any module ground, the module power becomes ground-referenced.
- Precision Sine-Wave Audio Signal
- Amplitude-Stable Oscillator
- Two Single-Tone Oscillators
- 1 kHz and 10 kHz
- Precise User-Adjustable Levels
- Each Oscillator Has Two Separate Outputs
- RDL SupplyFlex Power Input Configuration
2 for each oscillator, bal. or unbal.
200 Ω to drive high or low Z lines
1 kHz and 10 kHz
100 Hz and 400 Hz
Off to +10 dBu (adjustable) 600 Ω load. Level Maintained by internal AGC circuit
Ambient Operating Environment:
0° C to 55° C
GROUND-REFERENCED or FLOATING, 24 Vdc @ 80 mA
2 x 2 x 4 in.
RDL Three-Year Limited Warranty
Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and
conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the
Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products
manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date
of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or
products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge,
and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the
usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser.
RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or
modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or
proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental
cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any
liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either
separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or
not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support
appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end
user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements
reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized
to assume for RDL any other liability in connection with RDL products.