RDL ST-SH2 Stereo Headphone Amplifier

MSRP: $240.20
$180.15
Write a Review
SKU:
RDL-STSH2
Availability:
Ships From Manufacturer, Contact us for Pricing and Availability
Type:
Headphone Amplifier

Overview

The ST-SH2 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. For fixed level installations not requiring user volume control, the ST-SH2 is wired to the audio source and to a headphone jack. Frequently, it is desirable to mount a volume knob by the headphone jack. The LEVEL ADJUST terminals (L) and (R) may be wired to the respective wipers of a stereo 10 kΩ potentiometer to provide volume adjustment. It is recommended that the ST-SH2 be located less than 39 in. (1 m) from the jack and volume control.

The exceptional low noise (better than 100 dB below operating level), low distortion, audio clarity and excellent crosstalk performance makes this module ideally suited to a wide variety of demanding audio applications. Use this module in conjunction with other RDL® modules as part of a high quality, flexible audio/ video system.

Features:

  • Stereophonic Headphone Amplifier
  • Provision for External Stereo Level Control
  • Balanced or Unbalanced Input
  • Bridge a Line and Feed Headsets
  • Amplifier To Drive High or Low Impedance Headsets

Specifications

Inputs (2):
 
10 kΩ balanced or unbalanced, bridging

Input Signal:
 
-20 dBu (-22 dBV) to +6 dBu (for normal output level: +4 dBu, 100 Ω)
-10 dBu to +16 dBu (for 250 mW, 8 Ω output)

Output Load Impedance:
 
8 Ω to 5 kΩ (drives low or high impedance headphones)

Output Signal (normal rated):
 
+4 dBu into 100 Ω

Output Signal (maximum):
 
250 mW into 8 Ω, 20 Vp-p into 2 kΩ

THD+N:
 
< 0.005% (0.0015% typical @ 1 kHz)

Frequency Response:
 
20 Hz to 40 kHz (± 0.25 dB)

Noise:
 
< -100 dB below normal operating level

Dynamic Range:
 
> 115 dB

Gain:
 
Adjustable from -2 to 24 dB

CMRR:
 
> 50 dB at 100 Hz

Crosstalk:
 
< -65 dB (10 Hz to 20 kHz);
< -80 dB @ 1 kHz

Ambient Operating Environment:
 
0° C to 55° C

Power Requirement:
 
GROUND-REFERENCED, 24 Vdc @ 200 mA

Package Type:
 
Cardboard Box

Package Dimensions:
 
2 x 2 x 4 in.

Shipping Weight:
 
0.205 lbs.

WEEE weight:
 
0.15 lbs.

Tariff code:
 
8543.70.9960

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.