BDI SWP-200 RF Switch Controller Series

$2,695.00 - $2,895.00
Write a Review
SKU:
BDI-SWP200T ALL
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability

Overview

BDI SWP-200 RF Switch Controller Series

The SWP-200 is a stand alone 1RU RF switch controller which can control most brands of motorized RF switches. In addition the SWP-200 manages transmitter interlocks and simplifies the connection of interlock paths.

Models Available:

SWP-200-1T SINGLE SWITCH CONTROLLER $2,695.00
SWP-200-2T Main/AUX TX - Main/Aux Dual Antenna SWITCH CONTROLLER $2,895.00

Specifications

  • Modes Supported: TX1/TX2 select to Air—SWP‐200‐1T, ANT1/ANT2 select, TX1/TX2 select to Air—SWP‐200‐2T,
  • Number of Switches Supported: SWP‐200‐1T—1, SWP‐200‐2T—2
  • Switch Control Voltage: 12 or 24 VDC
  • Switch Manufactures supported: Dasto, Delta, Dielectric, DowKey, ERI, MCI, Myat, Spinner
  • TransmiƩer and Interlock Control: Both models control up to two transmiƩers providing TX ON/OFF and Interlock Management
  • TransmiƩer Interface: Form C dry contact relays
  • Remote Control interface SWP‐200‐1T: General Purpose I/O Control of Air Selected transmiter ON/OFF, Motorized Switch PosiƟon, Switch positon of second switch—SWP‐200‐2T Model, Fault Reset*
  • Additional Remote Control interface functons for SWP‐200‐2T: Antenna 1/2 Command/Status, Antenna Auto/Manual Command/Status,
  • Status Available: Motorized Switch positon, Fault Status, TX1,2 Interlock, Air TransmiƩer ON/OFF
  • AC Power Loss Monitor: Monitors for presence of AC Power loss to transmiƩer(s) to prevent switch operaƟon in auto mode if AC power is lost to transmiƩers—Logic input requires external circuitry
  • Power Measurement Range: 10 Watt to 100 KW Full Scale Indicaton*
  • Power Measurement Accuracy: +/‐5% of Reading—Dynamic Range 40 below Full Scale Indicaton*
  • Communicatons Interface: RS232/485, TCP/IP— Ethernet TCP/IP, SNMPv2 Agent and BDI Graphical User Interface CompaƟble with Windows XP, 7 , 8 ,10, Android
  • Physical Dimensions: 19” W X 10”D X 1.75” H—EIA Standard 1 Rack Unit
  • Electrical Requirements: 100‐240 VAC 50/60 Hertz @ 0.5 ampere
  • Environmental: 0‐60 degrees C, non condensing atmosphere
    * ‐ SWP‐2001/2R1‐1T/2T versions which include DPS‐100D Power Meter/Line SecƟon. Maximum Power Measurement is line size dependent. See ordering informaƟon for models available.