Tieline ViA Duo, Portable Field Codec For Reporting, Commentary & Off-Tube Remotes (coming soon)

Write a Review
SKU:
TIE-VIADUO
Availability:
Pricing & Availability To Be Announced
Adding to cart… The item has been added

Overview

Tieline ViA Duo, Portable Field Codec For Reporting, Commentary & Off-Tube Remotes (coming soon)

ViA Duo is the new generation of trusted ViA technology that truly bridges the gap between field reporting and commentary. Built for reporters and commentators alike, it is an ultra-portable broadcast platform that can operate as an IP codec, AoIP commentary node, or facilitate off-tube broadcasting through support for audio and video feeds. Simply take the codec to the remote site, power it up, and connect to your preferred network and start broadcasting. 
There’s no need for additional outboard gear like mixers, equalizers, compressors, noise gates, expanders, recorders and playback machines – with ViA Duo it is all-in-one and ready to go! ViA Duo supports HDMI video out, multiple AoIP protocols, plus IP streaming over multiple interfaces. It delivers an all-in-one solution consolidating your remote broadcast, commentary and off-tube broadcasting requirements into a single compact and lightweight box.

Features

  • 2 analog mic/line or digital (AES3) inputs
  • Stereo USB-C digital input/output
  • Full duplex Dual Mono or Stereo connections
  • Dual Ethernet LAN ports (LAN2 is also AoIP port)
  • Optional internal global 4G/LTE modem
  • 4.3 inch TFT Color LED screen with touch screen
  • Smaller Display: 160 x 128 RGB OLED display
  • User-friendly HTML5 Toolbox Web-GUI enables codec configuration and control remotely over WANs
  • IPv4 & IPv6 compatible and ready

AoIP Interfaces

  • AES67 Ready: Native support out-of-the-box so forget hardware card upgrades, just connect and go!
  • ST 2110-30: SMPTE ST 2110-30 compliance
  • Livewire+" Native support lets you connect directly to Livewire+ AES67 networks and exchange audio streams.
  • RAVENNA: Native support for RAVENNA, an open technology for stream discovery and advertisement.
  • NMOS: Supports AMWA NMOS IS-04 and IS-05 for discovery, registration, and control, and NMOS IS-07 Notifications for ST 2110 AoIP streaming, delivering a new level of interoperability and control with networked equipment throughout the broadcast plant.
  • Dante: Purchase the optional internal Dante card for interoperability with Dante networks using Dante Controller.
    Note: Optional at time of purchase
  • Ember+: The Ember+ control protocol is supported

In Depth

Live Remote Broadcasts: ViA Duo can operate as an ultra-portable remote IP codec for reporters, sports commentators and radio announcers, as well as broadcasters working from home. The compact ViA Duo is lightweight and fits in the palm of your hand. It features 2 XLR mic/line inputs and headphone outputs and can send bidirectional stereo or dual mono audio from any remote location to the studio using cellular, Wi-Fi or Ethernet connections.

Customized Communications: With dedicated cue and talkback buttons, the codec integrates seamlessly with communications systems to facilitate mix-minus IFBs and full duplex communications over IP or AoIP networks. Customize cue and talkback matrices with the touch screen to route audio locally to headphones or outputs, or to the studio.

Rock Solid Redundancy Options: ViA Duo delivers reliability with multiple layers of redundancy that can be fully automated to ensure rock solid connections. Auto backup is provided through Tieline’s proprietary SmartStream PLUS hitless packet switching, which sets the benchmark for redundant IP streaming over the public internet. Unlike some other manufacturers, hitless packet switching is included FREE!

ViA Duo for Stadium TV Commentary: The ViA Duo can be used in a variety of broadcast commentary roles for radio and TV broadcasts. Optional support for AoIP protocols like RAVENNA, Dante, AES67, ST2110-30, Livewire and NMOS facilitates using ViA Duo as an AoIP node in stadium commentary booths or on the sideline. Flexible options include connecting over a LAN to a remote truck at a venue, or over a WAN with a REMI (Remote Integration) use case back to a mixing console at a studio hub.

Specifications / Documents

Input / Output

  • Analog Audio Inputs: 2 x Female XLR mic/line inputs
  • AES3 (AES/EBU) Left/Right Input: 1 x female XLR (Channel 1 in; shared with Ch1 analog input); 24 bit inputs with support for sample rates from 32kHz to 96 kHz
  • LAN1 Port: 10/100 Ethernet port for IP streaming over WANs
  • LAN2/AoIP Port: 10/100 Ethernet port for IP streaming over WANs, or configure as Gigabit AoIP port for AoIP streaming* (AES67, ST 2110-30, Livewire+, RAVENNA, or optional Dante*). Note: Dante only supports 10/100.
  • AoIP Inputs/Outputs* (AoIP Port): 4 x Digital AoIP inputs/outputs via AES67, ST 2110-30, Livewire+, RAVENNA, or optional Dante. Note: AoIP inputs 1 and 2 are shared with USB Aux inputs 1 and 2. Simultaneous AoIP 1 and2 out and Aux USB out supported. 
  • USB-C Device Port: USB-C connector supports bidirectional USB audio via Aux inputs 1 and 2 (Aux inputs 1 and 2 are shared with AoIP inputs 1 and 2)
  • Micro SIM Card Slot: 3FF SIM (Micro SIM) card slot for internal 4G LTE cellular modem* (Optional)
  • Dual SMA Antenna Connectors: Antenna connections for the internal SIM card
  • USB 2.0 Host Port 1: USB Type-A supports connecting a single device like a cellular modem, or a tethered cellphone; supports up to 1A for charging and/or powering modems
  • USB 2.0 Host Port 2: USB Type-A for future use
  • HDMI Output: For video out
  • Headphones: 2 x 6.35mm (1/4”) Jacks
  • Micro SD Card Slot: Push-push Micro SD card slot for backup/restore of config, firmware upgrades, and simultaneous file record/playback of MPEG Layer 2, MPEG Layer 3, AAC, uncompressed 24-bit stereo PCM
  • Mic Phantom Power: Switchable 12V/48V phantom power on analog XLR inputs 1 and 2 (max 10mA per input)
  • Mic Input Rotary Switch: Line = TBC, Medium = TBC , High = TBC, and CFG = TBC
  • Preamp Gain: User selectable at TBC
  • Audio Input Impedance: High Impedance > 5K ohm (line input); approximately 2K ohm (mic input)
  • Clipping Level: +18dBu
  • A/D & D/A Converters: 24 bit
  • Frequency Response: 20Hz to 20kHz
  • Total Harmonic Distortion (Analog): < 0. TBC % (-TBC dB) at TBC dBu unweighted
  • Total Harmonic Distortion (Digital): <0.0001% (-120dB) at -1 dBFS
  • Analog Signal To Noise Ratio: > TBC dB at +TBC dBu, unweighted, 20Hz – 20kHz
  • Crosstalk: < TBC dB between adjacent channels

Encoding and IP Streaming

  • Encoding Formats: Tieline Music, Tieline MusicPLUS, Opus, G.711, G.722, MPEG Layer 2, MPEG Layer-3 LC-AAC, HE-AAC, HE-AACv.2, AAC-LD, AAC-ELD, 16/24 bit aptX® Enhanced algorithm. MPEG audio technologies licensed by Frunhofer IIS 
  • Uncompressed IP: Linear PCM16/24 bit 32kHz, 44.1kHz, 48kHz sampling
  • IP Sample Frequencies: 8kHz, 16kHz, 32kHz, 44.1kHz, 48kHz
  • Asymetric Encoding: Supports asymetric multi-format encoding
  • Protocols: RTP, RIST, DHCP, SIP, DNS, HTTP, IGMP, IPv4/IPv6, RTCP, RTSP, STUN, FTP, SNTP, SSL Security Certificate
  • SmartStream PLUS: Primary stream plus multiple redundant streams
  • Fuse-IP: Bond up to 2 IP interfaces to aggregate data
  • Forward Error Correction: Tieline in-band FEC or separate FEC stream as per RFC2733 and RFC5109

Data and Control

  • Configuration and connectivity: HTML5 Toolbox Web-GUI, AoIP Web-GUI, Cloud Codec Controller (CCC), TieLink Traversal Server
  • Wi-Fi: Wi-Fi 6: Dual-band (2.4/5 GHz) 1x1 IEEE 802.11a/b/g/n/ax WLAN

IP/AoIP Standards & Specifications

  • EBU N/ACIP Tech 3326: SIP compliant for audio contribution
  • I3P EBU Tech 3347: Intercom over IP compliant
  • Intercom over IP compliant: SIP Profiles Compliant
  • AES67 Compliant: 44.1.kHz, 48kHz, 96kHz Sample rates; 16 & 24 Bit, SDP*
  • SMPTE 2110-30 Compliant: Class A, Ax, B, Bx Sender and Receiver Compliant*
  • RAVENNA Compliant: Natively supports RAVENNA Stream Discovery and Advertisement*
  • Livewire Compliant: Natively supports Livewire+ for AoIP streaming*
  • Dante (Optional): Install an optional Dante card at purchase for Dante AoIP streaming support*
  • NMOS Compliant: NMOS IS-04, IS-05, IS-07 Discovery, Registration and Connection Management, Events and Tallys
  • Ember+: Supports Ember+ control protocol
  • Supported Audio Frames: 125us, 250us, 333μs, 1ms, 4ms, 5ms
  • Clock Modes Supported: Clock Modes Supported

* Optional Purchase

Advanced Networking

  • Quality of Service (QoS): Support for DiffServ (DSCP)
  • Synchronization: IEEE 1588-2008 (PTPv2)
  • SAP: SAP v2 (Session Announcement Protocol) as defined in RFC 2974

General

  • Dimensions: 5 11/16” x 2 15/16” x 7 7/8” 144mm (W) x 75mm (H) x 200mm (D)
  • Power: Li-ion battery or External 12VDC 3A Power Supply
  • Battery Type: Jupio ProLine NP-F750 (7.2V 6700mAh | 48.2Wh)
  • Front Panel:
    • Main Display: 4.3 inch TFT Color LED screen with touch screen
    • Smaller Display: 160 x 128 RGB OLED display
    • Navigation: Touch screen or 5 button keypad navigation