Overview
Trip-Lite SMART2200RMXL2U SmartPro 120V 2.2kVA 1.92kW Line-Interactive Sine Wave UPS, 2U, Extended Run, Network Card Options, LCD, USB, DB9
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and slot for optional Network Management Card. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
- 2.2kVA / 2200VA / 1920W line interactive 2U rack/tower UPS, Sine Wave
- Extended runtime options up to 1600W, 0.9 Power Factor, 4 post mounting kit
- USB, RS232, EPO and slot for network management card options
- 120V NEMA 5-20P input, 4 NEMA 5-15R & 4 NEMA 5-15/20R outlets
Specificatios
INPUT
| Rated input current (Maximum Load) |
16.0A |
| Nominal Input Voltage(s) Supported |
120V AC |
| UPS Input Connection Type |
5-20P |
| UPS Input Cord Length (ft.) |
10 |
| Recommended Electrical Service |
20A 120V |
| Input Phase |
Single-Phase |
OUTPUT
| Output Volt Amp Capacity (VA) |
2200 |
| Output Capacity (kVA) |
2.20 |
| Output Watt Capacity (Watts) |
1920 |
| Output kW Capacity (kW) |
1.92 |
| Output Capacity Details |
Output is reduced to 1600 watts maximum when used with external battery packs |
| Power Factor |
0.87 |
| Nominal Voltage Details |
120v nominal output in battery mode |
| Frequency Compatibility |
60 Hz |
| Output Voltage Regulation (Line Mode) |
-14%, +6% |
| Output Voltage Regulation (Battery Mode) |
+/- 5% |
| Load Management Receptacles |
Two switched single outlet load banks (1 5-15/20R & 1 5-15R) |
| Output AC Waveform (AC Mode) |
Pure Sine wave |
| Output AC Waveform (Battery Mode) |
Pure Sine wave |
| Nominal Output Voltage(s) Supported |
110V; 115V; 120V |
| Output Receptacles |
(4) 5-15R; (4) 5-15/20R |
| Individually Controllable Load Banks |
Yes |
BATTERY
| Battery Type |
Valve Regulated Lead Acid (VRLA) |
| Full Load Runtime (min.) |
4.5 min. (1920w) |
| Half Load Runtime (min.) |
12 min. (960w) |
| Expandable Battery Runtime |
Extended runtime supported via optional external battery packs |
| Expandable Runtime |
Yes |
| Expandable Runtime Description |
Maximum output capacity is 1600 watts when used with external battery packs |
| External Battery Pack Compatibility |
BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible) |
| DC System Voltage (VDC) |
48 |
| Battery Recharge Rate (Included Batteries) |
Less than 4.5 hours from 10% to 90% (typical, full load discharge) |
| Battery Access |
Front panel battery access door |
| Internal UPS Replacement Battery Cartridge |
RBC94-2U |
| Battery Replacement Description |
Hot-swappable, user replaceable batteries |
VOLTAGE REGULATION
| Voltage Regulation Description |
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145 |
| Overvoltage Correction |
Voltage reduction of 12% applies when input is between 127 and 145 |
| Undervoltage Correction |
Voltage boost of 12% applies when input voltage is between 96 and 108 |
| Severe Undervoltage Correction |
Voltage boost of 24% applies when input voltage is between 83 and 95 |
USER INTERFACE, ALERTS & CONTROLS
| Front Panel LCD Display |
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) |
| Switches |
3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions |
| Alarm Cancel Operation |
Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available |
| Audible Alarm |
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions |
SURGE / NOISE SUPPRESSION
| UPS AC Suppression Joule Rating |
570 |
| UPS AC Suppression Response Time |
Instantaneous |
| EMI / RFI AC Noise Suppression |
Yes |
2-year warranty, 3 year with registration
