Yamaha MG06, 6 Channel Analog Mixer

Yamaha MG06, 6 Channel Analog Mixer

For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of our products, from an unrivalled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction.

• 6-Channel Mixing Console
• Max. 2 Mic / 6 Line Inputs (2 mono + 2 stereo)
• 1 Stereo Bus
• “D-PRE” mic preamps with an inverted Darlington circuit
• XLR balanced outputs
• PAD switch on mono inputs
• +48V phantom power
• Metal chassis

High Quality Sound Op-amp
The head amp determines sound quality, and op-amp integrated circuits are one of the most important parts in the head amp circuit. MG Series mixers feature new, high-quality, custommade MG01 op-amps that we developed in cooperation with the semiconductor manufacturer. Although many other op-amps prioritize electrical design and efficiency, we worked directly with the semiconductor manufacturer to focus on sound quality first. MG01 op-amps feature redesigned circuitry in which even the internal components and wiring have been optimized, and use materials such as high-quality silicon wafers and copper wire to achieve superb resolution.

Switchable Phantom Power & PAD Switch
With phantom power, MG Series consoles allow you to take full advantage of the greater frequency response and high sound quality of condenser microphones. The input channel with PAD switch accepts MIC to line level of inputs, PAD Switch attenuates high input signals that often accompany mic'ed instruments during performance, avoiding the clipping that can seriously affect your mix.

LED level metering
Easy-to-read LED level metering allows output levels to be monitored with precision.

Metal Chassis
Built to last, MG Series mixers feature a rugged, impact-resistant, powder-coated metal chassis, offering an unrivalled level of durability. With a sleek design contoured for optimal convection cooling, the internal layout separates the power supply from the analog circuitry for superior noise reduction, and further extends the life of the components inside. To further ensure reliable performance, knob control placement above the surface of the chassis diverts any impact or pressure on the knobs to the chassis itself and not the circuit board or components underneath.

• Input Jacks
  • MIC/LINE 1/L,2/R: Combo jack*2 (Balanced)
  • LINE 3/4, 5/6: Phone jack*3(Unbalanced)
• Output Jacks
  • STEREO OUT L, R: XLR-3-32 *4 Phone jack *5 (Balanced)
  • PHONES: Stereo phone jack
• Frequency Response Input to STEREO OUT: +0.5 dB/-0.5 dB (20 Hz to 20 kHz), refer to the nominal output level @ 1 kHz, GAIN knob: Min
• Total Harmonic Distortion Input to STEREO OUT: 0.01 % @ +8 dBu (20 Hz to 20 kHz), GAIN knob: Min
• Hum&Noise Equivalent Input Noise: -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
• Crosstalk (1 kHz):  -88 dB
• Input Channels: 6 channels: Mono (MIC/LINE): 2, Stereo (LINE): 2
• Ouput Channels: STEREO OUT: 2, PHONES: 1
• Bus: STEREO: 1
• Mono Input Channel Function
  • PAD: 26 dB
  • HPF: 80 Hz, 12 dB/oct
  • EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
  • EQ LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
  • PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping (+11 dBu)
• Level Meter Post STEREO LEVEL Knob: 2 x 7-segment LED meter [PEAK (+11), +6, +3, 0, -3, -10, -20 dB]
• Phantom Power Voltage: +48 V
• Power Supply Adaptor: PA-130 (DC12 V/1.0 A, Cable length = 1.8 m), 120 V, 60 Hz,
• Power Consumption 12 W
• Included Accessory: AC power adaptor, Owner’s Manual, Technical Specifications (this leaflet)