Zoom UAC-232 32 Bit Float Audio Interface

MSRP: $225.00
$199.99
Write a Review
SKU:
ZOO-ZUAC232

Overview

The ZOOM UAC-232 USB Audio Converter is the first dedicated 32-bit float audio interface, designed for musicians who demand more quality in their productions.

Whether you're recording in the studio or on stage, sound levels can fluctuate. The UAC-232’s 32-bit float technology captures clip-free, low-noise recordings without the need to set gain. Featuring the same clean, low-noise preamps used in our professional F-Series recorders, the UAC-232 guarantees high-quality recordings in any setting.For podcasters and voiceover artists, 32-bit float ensures full quality audio for the entire dynamic range of a performance. It also protects against clipping when levels are not being monitored.

The UAC-232 Mix Control software allows you to modify I/O routing, activate loopback, and control input and monitoring levels. You can also activate Music mode to route to your DAW or Streaming mode combining all inputs into a single signal for streaming software.

The Loopback function combines the input audio with playback from your computer and routes it to your software. Perfect for adding background music to your stream or singing live with an instrumental track. Use the Direct Monitor switch to send the input signal directly to your headphones while routing the same signal to your DAW or streaming software. Mix Control allows you to adjust volume and pan for your direct monitor feed.

 

Features

  • Dual AD circuitry with 32-bit float recording technology
  • High-quality mic preamps, same as the Zoom F6
  • 2x XLR/TRS combo inputs
  • Headphone output and 2x TRS main outputs
  • High-power headphone outputs (100 mW)
  • Records up to 192 kHz sample rate
  • Compatible with Windows, Mac, and iOS devices (Android not supported)
  • Zoom Mix Control software mixer
  • MUSIC and STREAMING modes available via the software to optimize I/O
  • Loopback available via the software
  • Direct Monitor switch for latency-free recording
  • Vertical or horizontal use
  • MIDI IN/OUT for connection to external MIDI equipment
  • Bus-powered operation (separate power required for Lightenting-enabled iOS devices)

 

Specifications

Input and Output Channels

NUMBER OF INPUT CHANNELS Mono (MIC/LINE) 2
NUMBER OF OUTPUT CHANNELS Stereo (TRS) 1
  Stereo (headphone) 1
     

Connectors

INPUTS 1-2 Type XLR/TRS combo jacks (XLR: 2 HOT, TRS: TIP HOT)
  Input impedance XLR: 2.7 kΩ TRS: 4 kΩ/1 MΩ (when Hi-Z on)
  Maximum input level XLR: +6 dBu TRS: +24 dBu / +11.5 dBu (when Hi-Z on)
  Phantom power +48 V
OUTPUTS Type TRS phone jacks (balanced)
  Maximum output level +18 dBu (at 0 dBFS)
  Output impedance 100 Ω
HEADPHONES Type Standard stereo phone jack 100 mW + 100 mW (32 Ω load)
  Output impedance 12 Ω
MIDI   IN/OUT (5-pin DIN connectors)
USB   USB Type-C (audio interface function) • Use a USB cable that supports data transfer. USB bus power is supported.
DC 5V   USB Type-C (for power supply)
     

Frequency Response

INPUTS   44.1 kHz: 20 Hz – 20 kHz, +0.1 dB / −0.2 dB
    192 kHz: 20 Hz – 80 kHz, +0.1 dB / −0.2 dB
OUTPUTS   44.1 kHz: 20 Hz – 20 kHz, +0.0 dB / −0.1 dB
    192 kHz: 20 Hz – 80 kHz, +0.0 dB / −1.0 dB
HEADPHONES   44.1 kHz: 20 Hz – 20 kHz, +0.0 dB / −0.5 dB
    192 kHz: 20 Hz – 80 kHz, +0.0 dB / −1.0 dB
     

Equivalent Input Noise

    –127 dBu or less (IHF-A)
     

Audio Interface

INPUT AND OUTPUT CHANNELS   Recording: 2 channels Playback: 2 channels
SAMPLING FREQUENCIES   44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
BIT DEPTH   32-bit float / 24-bit
INTERFACE   USB 2.0
CLASS   USB Audio Class 2.0
     
POWER   AC adapter (ZOOM AD-17): DC 5 V/1 A • USB bus power is supported.
RATED CURRENT   USB / AC adapter (5 V): 293 mA
POWER CONSUMPTION   5 W maximum
DIMENSIONS   164 mm (W) × 105.5 mm (D) × 65 mm (H)
WEIGHT (UNIT ONLY)   355 g
     

Note: 0 dBu = 0.775 Vrms