Overview
American Recorder Y-SERT™ Adapters
Y-Sert Sold separately.
Select from 9 Connector Styles:
- XLR Male
- XLR Female
- 1/4" TRS Male
- 1/4" TRS Female
- 1/4" TS Male
- RCA Male
- RCA Female
- 3.5mm TRS Male
- 3.5mm TRS Female
INSTRUCTIONS: Slide the mode switch located on the side of the Y-SERT™ to either INSERT/STEREO or “Y” position. When the switch is in the “Y” position, the Y-SERT™ sends the input signal to both output cables. When the switch is in the INSERT/STEREO position, the Y-SERT™ splits the stereo input signal (Left and Right Channels), sending the Left channel signal to the Left output cable and the Right channel signal to the Right output cable. This configuration can also be used with the IN/OUT (insert) connections of processors and effects devices. NOTE: Always connect the audio adaptors and select the desired mode switch position on the Y-SERT™ Interface prior to connecting to any audio equipment. An audio extension cable may be necessary when using the Y-SERT™.
For intended use only. Not responsible for damage due to misuse or accident.
