Overview
Angry Audio 991012, Mic Talley Gadget
We love those beautiful M!KA microphone arms, especially the ones with the built-in tally lights. The Mic Tally Gadget controls those tally lights. The 5-pin XLR connectors carry the microphone audio and the signal voltage for the tally light. The microphone signals are passed through to your preamps via RJ45 connectors in the StudioHub+ format. If you’re using an Axia xNode or a Wheatstone blade, a shielded CAT-5 patch cable is all you need for the preamp connection.
The Mic Tally Gadget can control four mic arm tallies at once. Each position has its own logic connector so you can use your console logic to turn on the lights. Each tally can be red or white. Some engineers will use one color to signify on-air and another color for ready, talk signaling, or some other bright idea. Front panel switches can be used to manually control the tally lights.
Specifications / Documents
- Audio Connections
- Mic Inputs 5 pin XLR female jacks
- Mic Throughs RJ45 female jacks, StudioHub+ pinout
- Logic Inputs RJ45 female jacks, opto-isolated
- Power and Environmental
- Mains Power 115VAC/230VAC, 50/60Hz
- Power Connection Captive power cable, various plugs
- Tally Output 12VDC, 80mA
- Operating Temperature 0 to 40 C (32 to 104 F)
- Storage Temperature 20 to 45 C ( 4 to 113 F)
- Relative Humidity 0% to 90% non condensing
- Dimensions & Weight
- Width x Depth x Height 12 x 9 x 6 in. (30.5 x 22.9 x 15.3 cm)
- Weight 5 pounds (2.2 7 kg)
- Included in the box: Mic Tally Gadget, XLR5M cable connectors (4 pcs), Axia GPIO adapters (4pcs).
